Lead Pins Indicator Light, Clear, 24 V, 35 mA, 7500h

  • RS Stock No. 104-553
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): KR
Product Details

T-1 (4mm) Bi-Pin

A range of T-1 1/4 (4mm) Bi-pin filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc.

Body colour coding: White (6V), Yellow (12V), Green (24V), 14V and 28V colour coding not applicable

Wire-Ended & Bi-Pin

Filament lamps will perform to specification and give optimum life when:,a) They are powered at the rated voltage from a stabilised 50Hz ac supply,b) Ambient temperature is in the range 20 to 25°C,c) No mechanical vibration is present.,Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA). Operation from a dc supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care therefore should be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.

Specifications
Attribute Value
Voltage Rating 24 V
Lamp Base Lead Pins
Current Rating 35 mA
Diameter 4.14mm
Lamp Size T1 1/4
Length 20.35 mm
Lens Colour Clear
Luminosity 1.9 lm
Life Hours 7500h
1230 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Pack of 10)
$ 1.812
(exc. GST)
$ 1.993
(inc. GST)
units
Per unit
Per Pack*
10 - 90
$1.812
$18.12
100 - 490
$1.794
$17.94
500 - 2490
$1.746
$17.46
2500 - 4990
$1.697
$16.97
5000 +
$1.654
$16.54
*price indicative
Related Products
Each switch has two sets of SPST contacts, ...
Description:
Each switch has two sets of SPST contacts, one normally open and one normally closed, permitting a wide variety of switching functions to be carried outA complete assembly requires a switch unit (or indicator), a lens and a lamp, each ...
Designed for use in areas where a sealed ...
Description:
Designed for use in areas where a sealed front panel switch is required to work in hostile environmentsSupplied with one contact block fitted, but up to two extra blocks may be added to make a total of three per switch ...
A range of control devices with an IP65 ...
Description:
A range of control devices with an IP65 protection rating and conforming to IEC 947-5-1. Standard fixing aperture is 16mm. Behind panel depth (including terminals) is only 49mm. ,The devices can be butted together allowing a greater number of devices ...
A range of control devices with an IP65 ...
Description:
A range of control devices with an IP65 protection rating and conforming to IEC 947-5-1. Standard fixing aperture is 16mm. Behind panel depth (including terminals) is only 49mm. ,The devices can be butted together allowing a greater number of devices ...