Startech Cat6a Male RJ45 to Male RJ45 Ethernet Cable, STP, Blue PVC Sheath, 2m, CMG Rated

Use this Ethernet cable from StarTech.com for standard installations such as connecting a wall jack to your laptop docking station or desktop computer. The pure copper stranded conductors ensure a reliable 10-gigabit connection for seamless performance in modern data, CCTV or VoIP phone networks.

Foil-shielded RJ45 connectorsShielding on the connectors minimises near-end crosstalk and electromagnetic interference, maintaining the purity of your signal.
Reliable gold contactsThe50-micron gold contacts resist corrosion to provide excellent conductivity and ensure faithful transmission of the signal.

• Snagless RJ45 connectors protect the clips during installation
• Moulded strain relief prevents the cable from bending at sharp angles near the termination point, prolonging the life of the cable assembly
• Blue colour helps you organise your cable runs for easy identification

• Cat6a patch cable

What's the difference between a Cat6 and a Cat6a cable?A Cat6a cable can support around double the bandwidth of a Cat6 cable. The Cat6a can also be used for longer cable runs, as it will perform at 10 gigabits over 100m, compared with 37m for the Cat6 cable.

What is a Cat6a cable used for?
Cat6a ethernet cables are used as data cables, directly linking a router or a modem to the device accessing the ethernet. Cat6a is a great choice for large spaces which may not be able to connect to the ethernet within a short distance.

What is the difference between Cat6 and Cat6a
As a rule of thumb, the higher the Cat cabling type, the better the noise reduction and lower attenuation it can handle and as a result, can handle higher bandwidth. For example, Cat6 can handle higher data transfer rates and distances than Cat5.
The main difference between a Cat6a cable and a Cat6 cable would be the amount of bandwidth frequency they can support. Cat 6a can support double the amount of a Cat 6 around 500 MHz. After installation, Cat6a will also perform at 10 gigabits at 100 m, which is over the allocated length for a Cat6 cable (37 m). If choosing between the two, Cat6a is the more logical choice, especially for applications which may require networks at further distances apart.

What about safety?
As a standard, every Cat6a cable is listed as at least LSZH (Low Smoke Zero Halogen). Meaning these cables will emit a very little amount of smoke and no halogen if exposed to a high heat source. Although you should always check the kind of shielded version you need, especially in a high heat environment