DesignSpark Enclosure Mounting & Installation for use with DesignSpark Raspberry Pi Case

  • RS Stock No. 122-3465
  • Mfr. Part No. ASM-1900048-21
  • Manufacturer DesignSpark
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

VESA Mounting Brackets for DesignSpark Raspberry Pi 3 cases

These VESA mounting brackets enable you to mount a DesignSpark Raspberry Pi 3 case to the back of a display or monitor using the VESA attachment points. Note: Pi case not included.

Each bracket includes a locking clip which can be used to prevent the SD card from being removed from the Raspberry Pi.

Within the mounting bracket there is space to add a 2.5 inch hard drive for additional memory for your Raspberry Pi project.

Includes two M3 screws to attach a DesignSpark case to the mounting bracket.

These brackets are available in three colours:

• Clear bracket RS 122-3463
• White bracket RS 122-3464
• Black bracket RS 122-3465

The VESA mounting brackets are suitable for the following DesignSpark Pi cases:

• Clear case RS 103-4296
• White case RS 103-4297
• Black case RS 103-4295
• Black case RS 103-4300

Specifications
Attribute Value
Dimensions 110.09 x 110.09 x 18.5mm
Length 110.09mm
Width 110.09mm
Height 18.5mm
For Use With DesignSpark Raspberry Pi Case
On back order for despatch 04/08/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 3.35
(exc. GST)
$ 3.69
(inc. GST)
units
Per unit
1 +
$3.35
Related Products
Amp HAT Case for the Raspberry Pi and ...
Description:
Amp HAT Case for the Raspberry Pi and Just Boom Amp HAT The Amp HAT Case is a suitable enclosure for the Raspberry Pi and Amp HATThe 2 piece case is easy to use and protects the devices.Just Boom Digi ...
Peli Products, SL.U. (“Peli”) guarantees its injection moulded ...
Description:
Peli Products, SL.U. (“Peli”) guarantees its injection moulded products for a lifetime against breakage or defects in workmanship. Peli™ injection moulded cases are guaranteed to be watertight to a depth of 3.3 feet (1 meter) for 30 minutes if properly ...
Hand Held Instrument Cases Moulded in either flame ...
Description:
Hand Held Instrument Cases Moulded in either flame retardant ABS or general purpose ABS plastic2-piece lap joint construction Designed to meet IP54Extra deep top and shallow base sections Recessed area on top of case for keypads/displays, etc.Lid is secured with ...
RS Pro ABS Enclosure with Fixing Pads RS ...
Description:
RS Pro ABS Enclosure with Fixing Pads RS Pro ABS Enclosure with Fixing Pads are enclosures designed for industrial use and are ideal to be used as security devices enclosures or junction boxes Highly durable ABS plastic is resistant to ...