Weidmuller W Series Black Fused DIN Rail Terminal, Single-Level, Screw Termination

The Weidmuller ’W’ series fused terminals with standard screw clamp technology gives you short circuit and overload protection.

The voltage and current ratings are to VDE ratings.
For stock number 425-263 you will need a 20 x 5mm fuse
For stock number 454-508 you will need a 32 x 6.3mm fuse

CSA certified, UL listed, SEV, DEMKO, NEMKO, LLOYDS REGISTER OF SHIPPING, SETI, KEMA, Reg of USSR

These screw connection fuse isolators offer a compact solution with easy snap-on mounting. The LED indicators also make life much easier to identify where blown fuses are, saving you time and energy.

Screw clamp connection
Easy snap-on mounting
LED Indicators for blown fuses

• Energy systems
• Power supplies
• Lighting controllers
• Telecommunications
• Automated factory operations

A tidy and easy to use fuse isolator. Snap-on to your terminal block and screw into place, it is that simple. Ideally suited to industrial and electrical applications. If the fuse blows the LED indicator tells you, removing any guess work.

Start by turning off all relevant equipment and stripping the wire. Then loosen the screw in the entry slot, insert the exposed conductors and tighten. It's important to make sure this connection is secure for proper signal transmission.

The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.