Phoenix Contact MT Series Grey DIN Rail Terminal Block, 0.14 → 1.5mm², Double-Level, Screw Termination, CSA

Phoenix Contact range of feedthrough DIN rail terminals for connecting one cable input to two outputs.

The cable csa detailed applies to both solid and stranded wire construction.

If you need to connect a single cable input to a double output, this standard DIN rail terminal from Phoenix Contact will do the job. It accepts either solid or stranded wires sized between 26 and 16 AWG, or 0.14 mm² to 1.5 mm².
The terminal uses screw connections to keep your contacts firmly in place. At a width of just 4.2 mm, it saves space on the rail, allowing you to build a compact and organised system. Marking of all terminal points lets you arrange your system clearly, while standardised plug-in bridges make for simple potential distribution. The foot snaps easily onto NS15 DIN rails.
This device has a flammability rating of V0, meaning it will stop burning in 10 seconds and won't give off flaming drips. It also meets the RoHS (Restriction of Hazardous Substances) directive, to can be certain it contains no more than trace levels of hazardous substances.

• Current rating of 17.5 A
• Double-level
• Screw termination method
• Voltage rating of 400 V
• Weight of 3.45 g