ABB, 2-Pole Jumper Bar, BJS Series

  • RS Stock No. 482-1132
  • Mfr. Part No. 1SNA205774R1500 - BJS32-2
  • Manufacturer Entrelec
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Power terminal blocks from 35 to 120mm2

Ranges of power terminal blocks, fitted with 1 or 2 covers, for DIN rail.
A stopper, screw bridge bars and a branch for Faston 6.35 x 0.8mm tabs are available separately.
Central hex socket connection screw, 6mm.
M6 screw for direct fixing.

Approvals

UL, CSA

Specifications
Attribute Value
Accessory Type 2-Pole Jumper Bar
Series BJS
For Use With Terminal Block
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) Each
$ 32.94
(exc. GST)
$ 36.23
(inc. GST)
units
Per unit
1 +
$32.94
Related Products
Requires a separator end section every 40cm approx ...
Description:
Requires a separator end section every 40cm approx and at DIN rail extremities. A 6mm dia. hole is required in the cover at each separator. Transparent PVC protective cover, 1m length in 2 sizes Snap-fits into place and secured with ...
Glazed ceramic feed through terminals available in 2 ...
Description:
Glazed ceramic feed through terminals available in 2 sizes to fit the G-profile asymmetric rail to BS5825:1980, EN 50035 A maximum operating temperature of 250°C is achievable for continual use providing the correct end brackets are used. Terminal Pitch 8 ...
Requires a separator end section every 40cm approx ...
Description:
Requires a separator end section every 40cm approx and at DIN rail extremities. A 6mm dia. hole is required in the cover at each separator. Transparent PVC protective cover, 1m length in 2 sizes Snap-fits into place and secured with ...
Shielded clamping screw to directly contact shielded wires ...
Description:
Shielded clamping screw to directly contact shielded wires and busbars Transport rails 1000 mm long, tin-coated Distancing sleeve prevents buckling while fixing the transport rails (compatible with M5 screws)Insulated holding block for busbars with M4 x 8 mm screen for ...