Siemens, SITOP PSU100L DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 2.5A Output Current

  • RS Stock No. 756-3946
  • Mfr. Part No. 6EP1332-1LB00
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): RO
Product Details

SITOP Lite, Single Phase Power Supplies

SITOP lite are a range of power supplies from Siemens designed to meet the basic needs for use in industrial environments. The compact design means that these primary switched mode regulators require little space on the DIN Rail. The high efficiency of this range results in low power consumption and heat loss in the cabinet. The single phase SITOP lite power supplies are designed for basic requirements in industrial environments and offer all the key functions at an attractive price.

Features and Benefits

• Single phase wide-range input with manual switchover • Slim design - no lateral installation clearances required
• High degree of efficiency
• Green LED for "24 V OK"
• Adjustable output voltage for compensating voltage drops
• Parallel connection possible
• Ambient temperature range of 0°C to 60°C (above 45°C with derating)
• Short circuit and overload protection
• Certification to CE, cULus and CD

Product Application Information

To further increase 24 V availability, the SITOP lite power supplies can be combined with DC UPS, redundancy and selectivity modules.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail.
Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross-sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has a high efficiency to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards– If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has a high efficiency to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Approvals

CE, cULus, CB

Siemens 6EP1332-1LB00 Power Supply, 24 V, 2.5 A, 60 W

Specifications
Attribute Value
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 93 → 132V ac
Output Voltage 24 V dc
Output Current 2.5 A
Power Rating 60W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 125mm
Width 32.5mm
Mounting Type DIN Rail Mount
Output Voltage Adjustment Range 22.8 → 26.4V
Ripple And Noise 150mV Pk-Pk
Minimum Temperature 0°C
Depth 120mm
Series SITOP PSU100L
Maximum Temperature +60°C
Load Regulation 0.5%
23 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 89.61
(exc. GST)
$ 98.57
(inc. GST)
units
Per unit
1 - 2
$89.61
3 - 4
$81.76
5 +
$73.63
Related Products
SITOP Power 15 V Dual Output Stabilized Power ...
Description:
SITOP Power 15 V Dual Output Stabilized Power Supply The SITOP Power industrial power supply (PSU) with two 15 V outputs that can be switched in parallel and in series This PSU can be used to supply electronic loads with ...
S7-300 Power Supply The design and functionality of ...
Description:
S7-300 Power Supply The design and functionality of the SIMATIC PS 307 single-phase power supply with automatic range switchover of the input voltage is an optimal match to the SIMATIC S7-300 PLC The supply to the CPU is quickly established ...
SITOP Compact Power Supply Unit The single phase ...
Description:
SITOP Compact Power Supply Unit The single phase SITOP compact series are power supplies for the lower performance range Thanks to the space-saving slim design, they are especially suited to distributed applications in control boxes or in small control cabinets. ...
SITOP Modular Power Supply The one, two and ...
Description:
SITOP Modular Power Supply The one, two and 3 phase SITOP modular units are the technology power supplies for demanding solutions They offer maximum functionality for use in complex plants and machines. The wide-range input allows a connection to almost ...