Siemens, SITOP PSU100C DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 600mA Output Current

  • RS Stock No. 714-1280
  • Mfr. Part No. 6EP1331-5BA00
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): RO
Product Details

SITOP Compact Power Supply Unit

The single phase SITOP compact series are power supplies for the lower performance range. Thanks to the space-saving slim design, they are especially suited to distributed applications in control boxes or in small control cabinets. The SITOP compact range have low-power losses throughout the entire load range. The losses are low even during idling, which means they are perfectly suited for applications that are frequently in stand-by mode. The SITOP PSU100C power supplies have a wide-range input for AC and DC networks; plug-in terminals facilitate the electrical connection.

Features and Benefits

• Single phase wide range input from 85 V ac to 264 V ac or 110 V dc to 300 V dc • Small mounting surface due to its slim design
• High efficiency across the entire range
• Low energy consumption during no-load operation or standby
• Adjustable output voltage
• Green LED for "output voltage OK"
• Plug-in connecting terminals for pre-fabricated wiring and fast electrical connection
• Wide temperature range: -20 °C to 70 °C

Product Application Information

To increase the availability, the SITOP compact power supplies can be combined with DC UPS, redundancy and selectivity modules.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has a high efficiency to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Approvals

CE, cULus, cCSAus, CB, ATEX, cCSAus Class I Div 2, GL, ABS

Siemens 6EP1331-5BA00 Power Supply, 24 V 600 mA, 14 W

Specifications
Attribute Value
AC or DC Input Voltage Ac, Dc
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 24 V dc
Output Current 600 mA
Power Rating 14W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 80mm
Width 22.5mm
Mounting Type DIN Rail Mount
Minimum Temperature -20°C
Load Regulation 0.2%
Depth 100mm
Series SITOP PSU100C
Maximum Temperature +70°C
Hazardous Area Certification ATEX
Ripple And Noise 200mV Pk-Pk
27 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 114.25
(exc. GST)
$ 125.67
(inc. GST)
units
Per unit
1 - 2
$114.25
3 - 4
$104.25
5 +
$92.96
Related Products
Storm DEPS Power Supply Specified for use with ...
Description:
Storm DEPS Power Supply Specified for use with Storm AXS access control products this robust, steel encased, switch mode power supply is rated for continuous high performance applications Continuous full rated current to load Additional 05A to charge standby battery ...
Range of Level VI Efficiency Plugtop Power Supplies ...
Description:
Range of Level VI Efficiency Plugtop Power Supplies 5∼30V Level VI Efficiency3 Pin IEC (C14) Inlet Desktop Power Supply Universal Input 90∼264V-AC 47∼63Hz Efficiency >87.58%Short Circuit Protected Operating Temperature 0∼40°CRoHS-REACH and CE Compliant Limited Power Source (LPS)Very Low Power Consumption ...
12 to 360W Linear, Filtered 0470 Series 230-400Vac ...
Description:
12 to 360W Linear, Filtered 0470 Series 230-400Vac input voltage Input voltage adjustment taps:±15VSafety isolating transformer with electrostatic screen4510V input/output isolation Integral output protection fuse provided Twin output terminals for ease of connection Green output LEDEasy to read - laser ...
The TPP 15 AC/DC power supplies feature a ...
Description:
The TPP 15 AC/DC power supplies feature a reinforced double I/O isolation system according to medical safety standards IEC/EN/ES 60601-1 3rd edition for 2 x MOPP approved for an operating altitude of 5000 m The earth leakage current is below ...