Omron, S82S DIN Rail Panel Mount Power Supply, 5V dc Output Voltage, 1.5A Output Current

  • RS Stock No. 106-1056
  • Mfr. Part No. S82S 7705
  • Manufacturer Omron
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

7.5W Switch Mode DC to DC S82S Series

Note

Product is not CE marked and so would require external filtering to comply with current noise emmission regulations.

S82S 7705 Miniature Power Supply

The S82S Switch mode miniature DIN Rail mounted DC to DC power supply. The S82S has a power rating of 7.5 W and an output voltage of 5 V plus an input voltage of 12 to 24 Vdc. The miniature power supply provide you with ± 12 V and ± 15 V outputs and being only 65 mm deep allows you to mount onto control panels that are 100 mm deep. Overload protection is built into the power supply preventing overcurrent damage and also radiates natural airflow heat.

Features and Benefits.

• Series S82S • Miniature power supply DC to DC
• Depth 65 mm
• Weight 150 g
• Switch mode
• DIN Rail mounted and direct panel
• Natural air cooling
• Power rating 7.5 W
• Output voltage 5 V
• Output current 1.5 A
• Efficiency 60% to 73%
• Output voltage indication and adjustment
• Overload protection
• Single and dual output
• Green output indicators
• Storage temperature -25°C to 65°C
• RoHS compliant

What is a DIN Rail Mounted Power Supply?

A DIN Rail is a standard type of rail that is used to mount the power supply into racks. DIN Rails are a support for equipment. DIN Rails are normally made from aluminium but if there is a chance that the power supply suffers any shock or vibration, use a steel DIN Rail.

What is A Switch Mode Power Supply?

Switch mode power supplies are a general purpose power supply include a switching regulator converting AC mains power to a lower voltage DC. A Switch mode power supply is efficient limiting any wasted energy.

Safety.

When not using an aluminium DIN rail to mount the power supply use a mounting bracket. Mount the power supply ensuring air flow around the power supply. If you mount multiple power supplied side by side allow a minimum of 10 mm space between them. If you mount multiple power supplies we suggest forced air cooling. Do not apply more than a 75 N (Newton) force when tightening the power supply.
• Vibration resistance 10 to 55 Hz
• Shock resistance 294 m/s²

Standards

UL, CSA, RoHS Compliant

Specifications
Attribute Value
Output Voltage 5 V dc
Output Current 1.5 A
Power Rating 7.5W
Number of Outputs 1
Type Switch Mode
Width 37.5mm
Series S82S
Ripple And Noise ±2%
Load Regulation ±1.5%
Efficiency 60 → 73%
Depth 75mm
Minimum Temperature -10°C
Mounting Type DIN Rail
Maximum Temperature +60°C
12 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 241.40
(exc. GST)
$ 265.54
(inc. GST)
units
Per unit
1 - 2
$241.40
3 - 4
$211.23
5 +
$190.11
Related Products
The mini power supply devices designed into the ...
Description:
The mini power supply devices designed into the LOGO!8 module offer great performance in the smallest space: The excellent efficiency over the complete load range and the low performance loss during idle times guarantee efficient operation. The power supply has ...
The mini power supply devices designed into the ...
Description:
The mini power supply devices designed into the LOGO!8 module offer great performance in the smallest space: The excellent efficiency over the complete load range and the low performance loss during idle times guarantee efficient operation. The power supply has ...
The S8TS Switch mode, Din Rail mounted power ...
Description:
The S8TS Switch mode, Din Rail mounted power supply is a covered type, screw less terminal basic block without Bus Line connectors. S8TS-02505 has a power rating of 25 W and an output voltage of 5 V dc plus a ...
Omron S8JX series of power supplies are a ...
Description:
Omron S8JX series of power supplies are a general purpose power supply, easy to use and mount plus have a shorter body. The versatile S8JX series can be screw front, top and DIN rail mounted. Screw mounting must be used ...