Mean Well DRP Switch Mode DIN Rail Power Supply, 85 → 264V ac ac Input, 48V dc dc Output, 5A Output, 240W

RS Stock No.:: 282-580
Mfr. Part No.:: DRP-240-48
Brand:: Mean Well

Mean Well DRP Switch Mode DIN Rail Power Supply, 85 → 264V ac ac Input, 48V dc dc Output, 5A Output, 240W

Discontinued product

Alternatives

This product is not currently available. Here are our alternative recommendations.

PULS DIMENSION Q Switched Mode DIN Rail Power Supply, 100 → 240V ac ac Input, 48V dc dc Output, 5A Output, 240W

RS Stock No.: 514-5580

Price (ex. GST) Each

$854.15

(exc. GST)

$939.57

(inc. GST)

PULS DIMENSION C-Line Switched Mode DIN Rail Power Supply, 100→120V ac ac Input, 48V dc dc Output, 5A Output,

RS Stock No.: 627-6203

Price (ex. GST) Each

$298.40

(exc. GST)

$328.24

(inc. GST)

MEAN WELL SDR Switched Mode DIN Rail Power Supply, 88 → 264V ac ac Input, 48V dc dc Output, 5A Output, 240W

RS Stock No.: 765-4667

Price (ex. GST) Each

$432.43

(exc. GST)

$475.67

(inc. GST)

MEAN WELL WDR Switched Mode DIN Rail Power Supply, 180 → 550V ac ac Input, 48V dc dc Output, 5A Output, 240W

RS Stock No.: 765-4698

Price (ex. GST) Each

$204.01

(exc. GST)

$224.41

(inc. GST)

Chinfa DRA240 Switched Mode DIN Rail Power Supply, 90 → 264V ac ac Input, 48V dc dc Output, 5A Output, 240W

RS Stock No.: 789-4017

Price (ex. GST) Each

$142.08

(exc. GST)

$156.29

(inc. GST)

Chinfa DRA300 DIN Rail Power Supply, 90 → 264V ac ac Input, 48V dc dc Output, 6.25A Output, 300W

RS Stock No.: 896-2240

Price (ex. GST) Each

$265.96

(exc. GST)

$292.56

(inc. GST)

MEAN WELL NDR Switched Mode DIN Rail Power Supply, 90 → 264V ac ac Input, 48V dc dc Output, 5A Output, 240W

RS Stock No.: 122-2229

Price (ex. GST) Each

$94.50

(exc. GST)

$103.95

(inc. GST)

RS Stock No.:: 282-580
Mfr. Part No.:: DRP-240-48
Brand:: Mean Well

Mean Well DRP Series Single Output Power Supply

A range of single phase DIN Rail power supplies from Mean Well with a fanless design and wattages available between 45 W and 480 W.

Features and Benefits

• Universal AC input/Full range

• Protections: Short circuit/Overload/Over voltage/Over temperature

• Cooling by free air convection

• Can be installed on DIN Rail TS-35/7.5 or 15

• UL 508 (industrial control equipment) approved

• LED indicator for power-on

• 100% full load burn-in test

• Fix switching frequency at 100 kHz

• 3 years warranty

• Built-in active PFC function

Product Application Information

The units are suitable for powering security and building automation controls which are increasingly required in commercial and residential premises.

Why use a DIN Rail Power Supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC/DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids and relays.

Points to Consider When Buying a DIN Rail Power Supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail.

Protection Types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.

Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.

Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.

Efficiency – Choose a power supply that has an efficiency over 89% to minimise the amount of power dissipation, especially if the system relies on convection cooling.

Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.

Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Standards

UL508, TUV EN60950-1 approved

Mean Well DRP series 240 W, 48 V dc, 5 A DIN Rail power supply.

Attribute	Value
Type	Switch Mode
Output Voltage	48V dc
Output Current	5A
AC or DC Input Voltage	ac
AC or DC Output Voltage	dc
Input Voltage	85 → 264V ac
Power Rating	240W
Electrical Phase	1
Number of Outputs	1
Height	125mm
Width	125.5mm
Depth	100mm
Series	DRP
Maximum Temperature	+70°C
Minimum Temperature	-10°C
MTBF	289.9kh
Load Regulation	±1%
Ripple And Noise	150mV Pk-Pk
Mounting Type	DIN Rail Mount
Standards Met	RoHS Compliant, TUV EN 60950-1, UL 508
Special Features	Overvoltage and Short Circuit Protection
Output Voltage Adjustment Range	48 → 53V