Omron, S8VM DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 650mA Output Current

  • RS Stock No. 110-306
  • Mfr. Part No. S8VM-01524AD
  • Manufacturer Omron
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

15W to 1500W S8VM Series with Downtime warning

The S8VM range is in a traditional metal frame format with some new features. The S8VM range can be used as a first indication to supply problems which can result in lost production, The Early warning system (EWS) can diagnose different types of voltage dip and loss which in turn can be wired into a PLC or management system to warn of impending problems.

Series Benefits.

Output voltages easily identified by colour coded labels on the side of the unit
Meets the latest European and relevant international standard
Operating temperature range 0°C to +50°C

Part Number S8VM-01524AD

The S8VM Switch mode, DIN Rail-mounted power supply is a covered type, terminal block structure with screw terminals. Your fingers are protected from electric shocks. S8VM-01524AD has a power rating of 15 W and an output voltage of 24 V dc plus a rated input voltage of 100 V ac to 240 V ac. This model also includes a Sinking under-voltage alarm with green output indicators and is natural air-cooled. The under-voltage alarm allows you to investigate any errors and a power failure alarm notifies you of output voltage errors.

Features and Benefits.

• Covered type power supply • Terminal block structure
• Screw terminal
• Design stops screws from falling out of the terminal block
• Switch mode
• DIN Rail Mounting
• Sinking – Under-voltage alarm (no outputs)
• Green output indicators
• Natural air cooled
• Power rating 15 W
• Output voltage 24 V dc
• Input voltage 100 V ac to 240 V ac
• Efficiency 80% min.
• Frequency 50/60 Hz
• Rated output current 0.65 A
• Electric shock finger protection
• RoHS compliant including Lead Free construction

What is a DIN Rail Mounted Power Supply?

A DIN Rail is a standard type of rail that is used to mount the power supply into racks. DIN Rails are a support for equipment. DIN Rails are normally made from aluminium but if there is a chance that the power supply suffers any shock or vibration, use a steel DIN Rail.

What is A Switch Mode Power Supply?

Do not use an inverter output for the power supply. Mount the power supply using a DIN Rail and secure correctly ensuring limited vibration and shock resistance. Install the power supply away from contactors and other devices. Keep the power supply away from strong high frequency noise and surge. Vibration resistance 10 Hz to 55 Hz. 0.375 mm single amplitude in each 3 directions for 2 hours.
Shock resistance 150 m/s **2 in each 6 directions 3 times.

Standards

Supplied with

UL508/60950-1/604, CSA C22.2 No. 14/No. 60950-1/No.213, EN50178, EN60950-1

Specifications
Attribute Value
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 24 V dc
Output Current 650 mA
Power Rating 15W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 84.5mm
Width 38.6mm
MTBF 135000h
Efficiency 80%
Load Regulation ±0.8%
Minimum Temperature 0°C
Depth 98.1mm
Series S8VM
Maximum Temperature +50°C
Ripple And Noise ±1%
Mounting Type DIN Rail Mount
2 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 197.07
(exc. GST)
$ 216.78
(inc. GST)
units
Per unit
1 +
$197.07
Related Products
Filtered, rectified power supplies are built using a ...
Description:
Filtered, rectified power supplies are built using a security transformer equipped with a bridge rectifier and filter capacitorsWith no regulation, rectified power supplies provide a non-regulated voltage sensitive to variations in line supply and load. They can only be used ...
High-end power supplies must perform efficiently and reliably, ...
Description:
High-end power supplies must perform efficiently and reliably, even in challenging industrial environments This requires high power reserves, a long service life and optimal protection against overvoltage, vibration and extreme temperature conditions. New DCL technology gives PROtop an outstanding dynamic ...
Spring up terminal accepts wiring of ring terminalsSlim ...
Description:
Spring up terminal accepts wiring of ring terminalsSlim Size.Width: 22.5mm (10W/15W/30W), 36mm (60W/90W),46mm (120W),60mm (240W)Can be installed in six mounting directions.Optical mounting bracket is available for panel mounting.Five-Year Warranty.
Input frequency range 47-63Hz Fully regulated output Permanent ...
Description:
Input frequency range 47-63Hz Fully regulated output Permanent 25% extra power at 45° Overload & short circuit protection Output LED indication Paralleling capability