Phoenix Contact SUBCON-PLUS Series 2.77mm Pitch 18 Way Right Angle Male to Female Screw Terminal D-sub Connector

Technical data sheets
Legislation and Compliance
Non Compliant
COO (Country of Origin): DE
Product Details

Phoenix Contact SUBCON-PLUS PROFIBUS D-Sub Connectors

Phoenix Contact SUBCON-PLUS PROFIBUS 9 pin D-sub connectors are designed for use in PROFIBUS systems up to 12 Mbps allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS PROFIBUS d-sub connectors have an integrated terminating resistor which can be activated externally by a slide switch, surge protection, a shielded ABS housing and can all be used with standard PROFIBUS cables with an outside diameter of 8mm (type A & B)

For PROFIBUS cable quick stripping tool see stock number 801-8967
For cable stripping tool see stock number 803-4326
For screwdriver see stock number 803-4351

SUBCON-PLUS-PROFIB/PG/SC2 – 2708245

A right-angled D-SUB connector from Phoenix Contact. This male to female screw connector is part of the SUBCON-PLUS series and has a termination resistor that can be connected/ switched on through the slide switch. This is suitable for wire size 16 – 26 AWG.

Features and Benefits

• 35° angled cable entry and an internal connection unit which can be turned around enabling cable insertion from the left or the right and a screw connection
• 18 copper alloy contacts
• Metal plated ABS housing
• Operating temperature of -20°C to +70°C

Note

2708245 SUBCON-PLUS-PROFIB/PG/SC2

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Specifications
Attribute Value
Number of Contacts 18
Gender Male to Female
Body Orientation Right Angle
Mounting Type Cable Mount
Pitch 2.77mm
Termination Method Screw Terminal
Voltage Rating 60 V
Length 58mm
Width 39.4mm
Depth 16.6mm
Series SUBCON-PLUS
Maximum Operating Temperature +70°C
Contact Material Copper Alloy
Minimum Operating Temperature -20°C
52 : Next working day (AU stock)
38 : 5 working days (Global stock)
Price (ex. GST) Each
$ 86.21
(exc. GST)
$ 94.83
(inc. GST)
units
Per unit
1 - 24
$86.21
25 - 74
$84.06
75 - 199
$79.64
200 - 399
$74.94
400 +
$73.06
Related Products
90° PCB Plug & Socket Meets the size ...
Description:
90° PCB Plug & Socket Meets the size requirements of MIL-C-24308 Machined copper alloy contacts Conforms to BS9523, F0010 and F0018 Note The current rating for the PCB variants is 5A Meets the size requirements of MIL-C-24308. Machined copper alloy ...
Amphenol 17H Series Dual Port Stacked Right D-Sub ...
Description:
Amphenol 17H Series Dual Port Stacked Right D-Sub Plug and Socket Connectors 17H series Dual port stacked right angle mount D-Sub plug and socket connectors available with the following configurations:Stock number 691-8831: 9 way male d-sub on top and bottom ...
Dual port d-subs available in 4 industry sizes/positions:Standard ...
Description:
Dual port d-subs available in 4 industry sizes/positions:Standard Density (9 pin, 15 pin, 25 pin, 37 pin) & High Density (15 pin)Low cost, high performance stamped contactsStacked d-sub provides proper mating while maximizing board space.Nickel plated shells have ground indents ...
Phoenix Contact SUBCOM Screw Terminal D-Sub Connectors A ...
Description:
Phoenix Contact SUBCOM Screw Terminal D-Sub Connectors A right angled, D-SUB connector from Phoenix Contact. The 9-contact, male connector is part of the SUBCON series for universal use.Designed for using in the RS-485, RS-232 and RS-422 converter. • 35° angled ...