Multifunction units housed in a panel mounting case (DIN 43700) Prescaler option - multiplier programmable from 0.001 to 9.999 (counter and tachometer modes) The unit may be set in any of three modes: Counter Mode; Tachometer Mode; Time Meter Mode Counter mode: can be programmed for quadrature, differential, count/direction Tachometer mode: incoming pulses are counter per gate time, which can be pre-selected. Over speed or under speed can also be indicated Time meter mode: programmable time ranges and decimal point 45 x 45mm panel cutout
Hengstler Panel Mounting 48 x 48
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.