RC1682-SIG-DK SIGFOX Protocol RF Transceiver Development Kit
The RC1682-SIG-DK Development Kit is SIGFOX Ready™ and is based on the RC1682-SIG module from Radiocrafts. This kit is designed to help evaluate the RC1682-SIG module, develop an application and build prototypes.
RCxxxxDB-USB Demonstration Board RC-1682 SIGFOX Protocol Module USB-UART bridge +3.3V voltage regulator USB-A connector Reset and Configuration pushbuttons SMA antenna connector Firmware update connector Powered from USB or battery
RC-1682 SIGFOX Protocol Module RF Operating Frequency: 868.13MHz (Uplink), 869.525MHz (Downlink) ISM Band RF Output Power: +14dBm Receiver Sensitivity: -126dBm Modulation: DBPSK (Uplink), GFSK (Downlink) OTA Data Rate: 100bps (Uplink), 600bps (Downlink) Host communication: serial UART with RTS/CTS flow control Low-power modes: Idle, Sleep Power supply: +2.8V to +3.8Vdc Operating temperature range: -30 to +85°C Dimensions: 12.7 x 25.4 x 3.3mm SMT format
Note
SIGFOX module is also available separately under RS Part No. 123-6287.
Supplied with
2 x Demo Boards with fitted SIGFOX modules, 2 x SMA antennas, 2 x SMA to BNC adapters, 2 x USB cables