Microchip Technology MCP2542FD-E/SN, CAN Transceiver 8Mbit/s 1-Channel, 8-Pin SOIC

  • RS Stock No. 177-1939
  • Mfr. Part No. MCP2542FD-E/SN
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, low quiescent current,electromagnetic compatibility (EMC) and electrostatic discharge (ESD).

Supports CAN 2.0 and CAN with Flexible Data Rate CAN FD) Physical Layer Transceiver Requirements
Optimized for CAN FD at 2, 5 and 8 Mbps Operation
Maximum propagation delay: 120 ns
Loop delay symmetry: ±10% (2 Mbps)
Wake-up on CAN activity, 3.6 μs filter time
Very Low Standby Current (4 μA, typical)
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5V I/O
CAN Bus Pins are Disconnected when Device is Unpowered
An unpowered node or brown-out event will not load the CAN bus
Device is unpowered if VDD or VIO drop below its POR level
Detection of Ground Fault.

Specifications
Attribute Value
Maximum Data Rate 8Mbit/s
Number of Transceivers 1
Maximum Supply Current 70 mA
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Dimensions 4.9 x 3.9 x 1.5mm
Length 4.9mm
Width 3.9mm
Height 1.5mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +125 °C
Automotive Standard AEC-Q100
Minimum Operating Supply Voltage 4.5 V
Minimum Operating Temperature -40 °C
40 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each (In a Pack of 20)
$ 1.22
(exc. GST)
$ 1.34
(inc. GST)
units
Per unit
Per Pack*
20 - 20
$1.22
$24.40
40 +
$1.186
$23.72
*price indicative
Packaging Options:
Related Products
The LTC®2875 is a robust high speed, low ...
Description:
The LTC®2875 is a robust high speed, low power CAN transceiver operating on 33V or 5V supplies that features ±60V overvoltage fault protection on the data transmission lines during all modes of operation, including power-down. The maximum data rate has ...
The MAX14883E fault-protected, high-speed Control Area Network (CAN) ...
Description:
The MAX14883E fault-protected, high-speed Control Area Network (CAN) transceiver is optimized for industrial network applications This device features ±60V fault protection, a ±25V functional common mode input range, and high ±10kV ESD protection (contact discharge) on the CANH and CANL ...
Ethernet Controllers, Micrel Inc Micrel 10/100Base-TX MAC/PHY Controllers ...
Description:
Ethernet Controllers, Micrel Inc Micrel 10/100Base-TX MAC/PHY Controllers offer the perfect solution for adding high throughput, cost effective Ethernet connectivity Micrel 10/100Base-TX MAC/PHY Controllers offer the perfect solution for adding high throughput, cost effective Ethernet connectivity.
The KSZ8864RMN is a highly-integrated, Layer 2 managed ...
Description:
The KSZ8864RMN is a highly-integrated, Layer 2 managed 4-port switch with optimized design, plentiful features and smallest package size It is designed for cost-sensitive 10/100Mbps 4-port switch systems with on-chip termination, lowest-power consumption, and small package to save system cost. ...