Cutters

Cutters are a hand held tool for cutting different materials.
Typical Types of Cutters
• Diagonal cutters are also known as side cutters. They are ideal for gripping, splicing or cutting wires, and strip insulation. They cut by indenting and wedging the wire apart and give a cleaner cut than using a knife.
• End cutters also known as nippers are used to cut through wire, springs, nails, bolts and rivets. They have an almost flat bladed head which lets you cut close against the surface without digging into it.
• Wire rope cutters for the clean shearing of wire rope without fanning. The jaws pull the wire rope into them and trap the cable.
• Bolt cutters are designed to send a large amount of torque to the cutting head to make cutting metal locks easy.
• Snipe nose or needle nose cutters are designed to hold and cut.

...
Read more Read less

Filters

Viewing 41 - 60 of 228 products
Results per page
Description Price Model Number Non Sparking Type Overall Length Jaw Length VDE/1000V Approved Height Safe ESD Safe Material Maximum Cutting Capacity Cutting Capacity Copper Wire Cutting Capacity Ductile Wire Cutting Capacity Hard Wire Cutting Capacity Iron Wire
RS Stock No. 187-8270
Mfr. Part No.64 12 115
BrandKnipex
$83.95
Each
units
- - End Cutter 115 mm 6mm - - - Tool Steel 2mm - - 0.5mm -
RS Stock No. 288-910
Mfr. Part No.78 91 125 RS
BrandKnipex
$51.95
Each
units
- - Electronics Diagonal Cutter 125 mm - - - - - - - - - -
RS Stock No. 158-5675
Mfr. Part No.64 02 115
BrandKnipex
$67.02
Each
units
- - End Cutter 115 mm 6mm - - - Tool Steel 2mm - - 0.6mm -
RS Stock No. 208-1988
BrandRS PRO
$83.04
Each
units
- - Compound Action 160 mm - - - - Steel 2.6mm 2.6mm - - -
RS Stock No. 763-8160
Mfr. Part No.73 72 180
BrandKnipex
$119.50
Each
units
- - Diagonal 180 mm - - - - Chrome Vanadium Steel 5.5mm - - 3.2mm -
RS Stock No. 540-1969
BrandRS PRO
$27.25
Each
units
- - Cut and Bend 138 mm - - - Yes - 1.02mm 1.02mm - - -
RS Stock No. 787-0364
Mfr. Part No.25.E5152.CRBG
BrandIdealtek
$100.02
Each
units
- - Full Flush 125 mm 12.5mm - - Yes Ball Bearing Steel - - - - -
RS Stock No. 187-8309
Mfr. Part No.64 42 115
BrandKnipex
$85.42
Each
units
- - End Cutter 115 mm 10mm - - - Tool Steel 1.5mm - - 0.5mm -
RS Stock No. 124-6108
Mfr. Part No.TAH2101G-140
BrandBahco
$79.65
Each
units
TAH2101G-140 - Side Cutter 140 mm 16mm - Yes - Alloy Steel 1.8 mm, 2 mm, 3.7 mm 3.7mm - - 2mm
RS Stock No. 910-7175
Mfr. Part No.T3888
BrandCK
$26.51
Each
units
- - Diagonal 135 mm - - - Yes - - 1.6mm - - -
RS Stock No. 540-2013
BrandRS PRO
$29.25
Each
units
- - Cut and Clench 138 mm - - - Yes - 1.02mm 1.02mm - - -
RS Stock No. 834-8016
Mfr. Part No.3-971-15
$97.19
Each
units
- - Side Cutter 125 mm - - - Yes Chrome Vanadium Steel 1.6mm - - 0.5mm -
RS Stock No. 847-8079
Mfr. Part No.8316-160 JC
BrandGedore
$62.98
Each
units
8316 JC - Side Cutter 160 mm 19mm - - - Steel 1.6mm - - - -
RS Stock No. 787-0402
Mfr. Part No.25.E5342.CRBG
BrandIdealtek
$68.35
Each
units
- - Full Flush 125 mm 10mm - - Yes Ball Bearing Steel - - - - -
RS Stock No. 847-8076
Mfr. Part No.6745080
BrandGedore
$74.59
Each
units
8316 JC - Side Cutter 200 mm 22mm - - - Steel 2mm - - - -
RS Stock No. 815-6378
Mfr. Part No.95 05 155 SB
BrandKnipex
$45.05
Each
units
- - Shear Cutter 155 mm - - - - Stainless Steel - - - - -
RS Stock No. 787-0360
Mfr. Part No.25.E5151.CRBG
BrandIdealtek
$94.98
Each
units
- - Flush 125 mm 12.5mm - - Yes Ball Bearing Steel - - - - -
RS Stock No. 239-3900
Mfr. Part No.670EP
$122.44
Each
units
670EP - Flush 110 mm 9mm - - Yes Tool Steel 0.6mm 0.6mm - - -
RS Stock No. 815-6394
Mfr. Part No.77 32 120 H ESD
BrandKnipex
$203.28
Each
units
- - Diagonal 120 mm 14mm - - Yes Carbide 0.6mm - - 0.6mm -
RS Stock No. 834-8000
Mfr. Part No.3-967-15
$85.49
Each
units
- - Side Cutter 120 mm - - - Yes Chrome Vanadium Steel 0.8mm - - - -
Related Products
Tools with precision box joint and captive, low-friction ...
Description:
Tools with precision box joint and captive, low-friction double springSpecial tool steel, oil-hardened and temperedMirror polished with excellent corrosion protectionCutting edge hardness 56 HRCDual component handles for fatigue-free, sensitive work.
Their reduction ratio increases cutting power by 50 ...
Description:
Their reduction ratio increases cutting power by 50 %.Dual material handles for a more comfortable grip.1/3 lighter than standard pliers to reduce hand fatigue.Induction hardened edges for maximum durability.Plier pins are heat-treated for more flexible and smoother operation.
Stork Beak Pliers with tether attachment point. Distortion-tolerant, ...
Description:
Stork Beak Pliers with tether attachment point. Distortion-tolerant, elastic precision tipsHalf-round, long, pointed jawsCutting edges (hardness approx. 61 HRC) for soft, medium-hard and hard wireVanadium electric steel; forged, oil-hardened.
Bahco Pliers and Side Cutters are the tools ...
Description:
Bahco Pliers and Side Cutters are the tools designed for professionals. Made from black finished, anti-corrosion treated, chrome-vanadium steel to ensure the long life and safe service. Ergonomically designed non-slip handles feature an integrally moulded, thermoplastic elastomer inserts to reduce ...