Linear Scales

Linear scales are used to obtain accurate measurement of distance, mass and volume. A wide variety of measuring ranges are available. Linear scales offer ● Sturdy construction ● High resistance to vibration ● Protection rating are similar in upright and reclining position ● ● Linear scales are highly resistant to environmental disturbances. Electromagnetic induction principle means scales are unaffected by contamination. Suitable for milling machines, drilling machines, XY tables etc. Features include ● Enhanced vibration-resistance and durability ● The innovative rubber lips keep out contaminants when you are using the scale in a machine shop ● An armoured signal cable is used to connect the scale unit to the DRO counter, so you can operate it safely even in hostile environments ● The signal cable outlet can be positioned on either side of the slider so you can connect the signal cable from either direction The Linear Scale System has superior ease-of-use and is reliable, both of which are features that can dramatically improve machining accuracy and efficiency.

...
Read more Read less

Filters

Viewing 1 - 3 of 3 products
Results per page
Description Price Accuracy Cable Length IP Rating Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 795-9930
Mfr. Part No.539-807
BrandMitutoyo
$940.31
Each
units
±5 μm 3.5m IP67 +45°C 0°C
RS Stock No. 795-9912
Mfr. Part No.539-802
BrandMitutoyo
$841.64
Each
units
±5 μm 3.5m IP67 +45°C 0°C
RS Stock No. 795-9924
Mfr. Part No.539-804
BrandMitutoyo
$826.84
Each
units
±5 μm 3.5m IP67 +45°C 0°C
Related Products
Vernier Caliper with hardened Stainless Steel frame and ...
Description:
Vernier Caliper with hardened Stainless Steel frame and jaws for extremely accurate outside, inside, step and depth measurements Dual scale with both metric and imperial readings Manufactured from hardened steel Fine adjustment mechanism with lockscrews Suitable for general workshop and ...
The Kleffmann & Weese 0 to 150mm range ...
Description:
The Kleffmann & Weese 0 to 150mm range precision calliper is a highly accurate measuring instrument It is made from fully hardened stainless steel construction and has an anti-glare, satin chrome finish. All measuring surfaces are ground and lapped for ...
Innovative, Swiss-made 2 m folding rule with additional ...
Description:
Innovative, Swiss-made 2 m folding rule with additional functions Fibreglass-reinforced polyamide, scratchproof, shatter-proof, weatherproof and washable Interior and depth gauge using extendible depth extension Hinge with 90° angle measurement scale for measuring angles Pushbutton locking of depth gauge on third ...
Metre rule made from white beech with closely ...
Description:
Metre rule made from white beech with closely spaced 3 mm-thick arms Embedded hinges with steel springs and covered rivets White/yellow, with water-, wear- and solvent-resistant protective varnish surface finish Red heads, black scale divisions, red tens digits, cm/mm divisions ...