I/P & E/P Converters

Filters

Viewing 1 - 6 of 6 products
Results per page
Description Price Manufacturer Series Flow Rate Input Signal Connection Size Connection Thread Standard Maximum Operating Pressure Maximum Operating Temperature Connection Thread Size Minimum Operating Pressure Minimum Operating Temperature Hazardous Area Certification Overall Height Minimum Outlet Pressure Maximum Input Pressure
RS Stock No. 884-9279
Mfr. Part No.ITV2010-01F2BS3
BrandSMC
$787.66
Each
units
- 1500L/min 4 → 20mA G 1/4 G 0.2 MPa +50°C 1/4 - 0°C - - - -
RS Stock No. 538-3782
Mfr. Part No.EX140 01PK4EE1
$940.21
Each
units
140 <2.5NL/min 4-20mA NPT 1/4 Female NPT 15 psi +85°C 1/4 in 3psi -40°C ATEX - - -
RS Stock No. 538-3798
Mfr. Part No.AC0100
$1,135.99
Each
units
422 0.2 (Low) L/min, 0.4 (High) L/min 4-20mA NPT 1/4 Female NPT 1 bar +70°C 1/4 in 0.2bar -20°C - - - -
RS Stock No. 873-2648
Mfr. Part No.ITV0050-0BS
BrandSMC
$503.43
Each
units
- - - - - - +50°C - - 0°C - 86 (For Single Unit) mm, 89 (For Manifold) mm 0.001MPa 1MPa
RS Stock No. 729-486
Mfr. Part No.540400R
$912.97
Each
units
100X, 101X 1.75L/min 1 → 10V (Volts) NPT 1/4 Female NPT 120 psi +60°C 1/4 in 2psi - - - - -
RS Stock No. 729-470
Mfr. Part No.400100R
$757.78
Each
units
100X, 101X 0.85L/min 4-20mA NPT 1/4 Female NPT 15 psi +85°C 1/4 in 3psi -40°C - - - -
Related Products
A range of highly integrated dedicated high-current LED ...
Description:
A range of highly integrated dedicated high-current LED Driver ICs for use in lighting and display backlight applicationsLinear Technology’s LED driver ICs are configured as Inductorless white LED drivers (parallel) or switching regulator based white LED drivers (series). The range ...
A charge pump IC converts voltages using switching ...
Description:
A charge pump IC converts voltages using switching voltage technology and capacitive-energy storage elements Charge pumps offer high-efficiency and compact solutions for applications with low-output current requirements.
A range of SEPIC DC-DC Converters from Linear ...
Description:
A range of SEPIC DC-DC Converters from Linear Technology which can be used in applications where the output voltage may be either higher or lower than the input voltage The SEPIC (Single-Ended Primary-Inductor Converter) topology also allows these converters to ...
The STEVAL-ILL074V2 board provides a mains-isolated +52Vdc power ...
Description:
The STEVAL-ILL074V2 board provides a mains-isolated +52Vdc power supply suitable for secondary-side circuitry (eg. lighting LED drivers), up to a total output power of 60W over a wide input voltage range. A very high power factor is obtained thanks to ...