Brass & Copper Push Fit Fittings

Copper Pipe Fittings
Copper is used as it can tolerate very high temperatures and as such, is used widely for central heating applications

Different types of Fittings

Adapters
Adapters are used to extend runs, or to simply change the connection type at the end of a pipe

Bushings
Bushings are used to join pipes of different sizes, usually by reducing a larger fitting down to a smaller pipe.

Couplings
A coupling is used to extend the run of a pipe, or change pipe sizes

Elbows
If you need to change the direction of flow, elbows are likely your best bet. Produced primarily in 90 and 45 degree angles (unique sizes like 22.5 and 60 are also available), elbows can be threaded or sweated, and are one of the most crucial fittings used in plumbing

Tees
When more than one branch is required of a water supply, tees are the way to go. Essentially a long coupling with an outlet on the side, these fittings feature their outlets at 90° from the inlet, and are sized according to their "run" (the horizontal, or straight-through dimension of the fitting), and the side outlet (the "top" of the fitting, 90 degrees off the run). When the run of a tee is smaller than the side outlet, it's often referred to as a "bull head" fitting.

Caps and Plugs
A cap, as its name suggests, is a cap that goes over the end of a pipe, creating a dead end. Plugs also stop up a pipe or tube system, but are plugged, like a stopper, into the end of the pipe.

Cross type Fitting
Cross type fittings contains 4 opening in 4 directions. These are connected when there are 4 pipes are meeting at a point.

...
Read more Read less

Filters

Viewing 1 - 20 of 33 products
Results per page
Description Price Fitting Direction Fitting Type Material Push Fit Pipe Size Threaded Connection Threaded Tee Connection Demountable Connection Gender Tee Gender Thread Size Thread Size Tee Thread Standard Thread Standard Tee
RS Stock No. 199-2360
Mfr. Part No.15MC(1/2)BRASS
BrandJohn Guest
$15.24
Each
units
Straight Coupler Brass 15mm 1/2 in BSP Male - Yes - Male 1/2in - BSP -
RS Stock No. 712-6724
Mfr. Part No.TX24/TX130 15
$10.06
Each
units
- Equal Tee Brass 15mm - - Yes - - - - - -
RS Stock No. 340-6776
Mfr. Part No.MM052206N
$16.647
Each (In a Pack of 3)
units
Straight Stem Adapter Brass 22mm 3/4 in R Male - - - Male 3/4in - R -
RS Stock No. 712-6768
Mfr. Part No.65874
$10.14
Each
units
- End Stop Brass 22mm - - Yes - - - - - -
RS Stock No. 199-2376
Mfr. Part No.22MC(3/4)BRASS
BrandJohn Guest
$22.02
Each
units
Straight Coupler Brass 22mm 3/4 in BSP Male - Yes - Male 3/4in - BSP -
RS Stock No. 340-6760
Mfr. Part No.MM051504N
$9.663
Each (In a Pack of 3)
units
Straight Stem Adapter Brass 15mm 1/2 in R Male - - - Male 1/2in - R -
RS Stock No. 340-6754
Mfr. Part No.PM22WB
$28.48
Each
units
90° Wall Plate Elbow Adapter Brass 22mm - - - - - 3/4in - BSP -
RS Stock No. 468-6210
Mfr. Part No.15SVSTC
BrandJohn Guest
$23.96
Each
units
- Service Valve Brass 15mm - - Yes - - 1/2in - BSP -
RS Stock No. 840-6033
Mfr. Part No.SB231550015F
BrandSharkbite
$30.98
Each
units
Straight Push-Fit to BSP Connector Brass 15mm 1/2 in BSP Female - Yes - Female 1/2in - BSP -
RS Stock No. 840-5826
Mfr. Part No.SB0328
BrandSharkbite
$31.47
Each
units
90° Equal Tee Brass 28mm - - Yes Female Female - - - -
RS Stock No. 712-6746
Mfr. Part No.65121
$9.53
Each
units
Straight Coupler Brass 22mm - - Yes - - - - - -
RS Stock No. 712-6742
Mfr. Part No.TX61/TX301 15
$6.55
Each (In a Pack of 2)
units
- End Stop Brass 15mm - - Yes - - - - - -
RS Stock No. 712-6736
Mfr. Part No.TX480 15
$18.24
Each
units
- Service Valve Brass 15mm - - Yes - - - - - -
RS Stock No. 840-5683
Mfr. Part No.SB0115-S
BrandSharkbite
$5.25
Each
units
Straight Coupler Brass 15mm - - Yes - Female - - - -
RS Stock No. 840-5793
Mfr. Part No.SB0515ST-S
BrandSharkbite
$8.23
Each
units
45° Street Elbow Brass 15mm - - Yes - Female - - - -
RS Stock No. 712-6774
Mfr. Part No.TX21/TX041 15
$8.11
Each
units
Obtuse Elbow Brass 15mm - - Yes - - - - - -
RS Stock No. 712-6718
Mfr. Part No.TX526S/TX467 15
$14.49
Each
units
- Draining Tap Brass 15mm - - Yes - - - - - -
RS Stock No. 712-6783
Mfr. Part No.TX27/TX130 22X15X15
$17.14
Each
units
- One End & Branch Reducer Tee Brass 22 x 15mm - - Yes - - - - - -
RS Stock No. 712-6733
Mfr. Part No.TX3/TX243G 15
$7.585
Each (In a Pack of 2)
units
Straight Taper Coupler Brass 15mm 1/2 in R Male - Yes - Male 1/2in - R -
RS Stock No. 712-6777
Mfr. Part No.TX3/TX243G 22X3/4
$20.12
Each
units
Straight Taper Coupler Brass 22mm 3/4 in R Male - Yes - Male 3/4in - R -
Related Products
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessoriesSuitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many ...
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessoriesSuitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many ...
Chromium plated brass fittings. Type A fittings suitable ...
Description:
Chromium plated brass fittings. Type A fittings suitable for mechanically joining metric o/d tubing in accordance with: Copper tube to BS2871: Part 1: Table X Table Z. Stainless steel tube to BS4127: Part 2: 1972.For suitable chromium plated copper tubeBS864/2 ...
Chromium plated brass fittings. Type A fittings suitable ...
Description:
Chromium plated brass fittings. Type A fittings suitable for mechanically joining metric o/d tubing in accordance with: Copper tube to BS2871: Part 1: Table X Table Z. Stainless steel tube to BS4127: Part 2: 1972.For suitable chromium plated copper tubeBS864/2 ...