Aluminium Capacitors

Aluminium capacitors are a type of electrolytic capacitor. A capacitor is a two-terminal electrical component that can store energy, somewhat like a battery. Aluminium capacitors are polarised, meaning that the energy can only flow in a single direction. High purity grade Aluminium is used to create the anode foil and the cathode foil upon which electrolysis is applied to form an extremely thin insulating layer of aluminium oxide, which acts as the dielectric of the capacitor. Aluminium capacitors are found in many applications such as power supplies, computer motherboards and domestic appliances.

Dependent on the nature of the Electrolyte, capacitors may also be referred to as “wet” meaning they have a liquid electrolyte or solid. Solid Electrolytes may be hybridized with Aluminium but normally refers to Polymer or Tantalum based capacitors


Types of Aluminium Capacitors


Aluminium Electrolytic Capacitors


Electrolytic capacitors consist of an electrolyte which is a liquid or gel that consists of a large concentration of ions, and when voltage is applied across its terminals, it leads to charges being stored on the anode and cathode foils. The electric charge that can be stored by the capacitor is measured in Farads but usually in the range from nanofarads to millifarads. .Aluminium capacitors are used where high capacitance values to provide smoothing and filtering functions in the circuit. Commonly used in DC Power supplies due to their large capacitance and their compact size which helps to reduce the ripple voltage. Aluminium Electrolytic capacitors have reasonable Equivalent Series Resistance (ESR) but have the lowest leakage current from all capacitor types.


Polymer Electrolytic Capacitors


Polymer capacitors (also are known as polymer electrolytic capacitors or polymer e caps) have conductive polymer as their electrolyte material within a layered aluminium design. These capacitors combine unique properties from the polymer material in terms of high conductivity, extended temperature range and no risk of drying out – to make a capacitor that offers large capacitance and very low ESR (equivalent series resistance) with high ripple current capability and offer a longer operating life. Polymer capacitors offer a lot of package options between 2.2 to 470 microfarad


Hybrid Capacitors


Hybrid capacitors (polymer hybrid aluminium capacitors) are a mix of wet electrolyte and solid polymer. In this sense, they combine the best of both electrolytes. These capacitors offer high endurance, low ESR, and a high tolerance for ripple current. Hybrid capacitors also feature stable electric characteristics at high frequencies whilst maintaining reliability. The liquid electrolyte keeps the Leakage current very low and also allows self-repairing of the aluminium foils which prevent a drop in capacitance.


...
Read more Read less

Filters

Viewing 61 - 80 of 19202 products
Results per page
Description Price Capacitance Technology Voltage Mounting Type Dimensions Height Length Depth Diameter Minimum Operating Temperature Maximum Operating Temperature Construction Lead Pitch Lifetime
RS Stock No. 711-1457
BrandRS PRO
$0.145
Each (In a Pack of 25)
units
220µF Electrolytic 50V dc Through Hole 10 (Dia.) x 15mm 15mm 15mm - 10mm -40°C +105°C - 5mm 2000h
RS Stock No. 711-1407
BrandRS PRO
$0.081
Each (In a Pack of 100)
units
1µF Electrolytic 50V dc Through Hole 5 (Dia.) x 11mm 11mm 11mm - 5mm -40°C +105°C - 2mm 1000h
RS Stock No. 162-0720
BrandRS PRO
$0.847
Each (In a Bag of 100)
units
33µF Electrolytic 350V dc Through Hole 16 (Dia.) x 36mm 36mm 36mm - 16mm -25°C +105°C - - 1000h
RS Stock No. 707-5682
BrandRS PRO
$0.08
Each (In a Pack of 100)
units
10µF Electrolytic 50V dc Through Hole 5 (Dia.) x 7mm 7mm 7mm - 5mm -40°C +105°C - 2mm 1000h
RS Stock No. 170-1242
BrandRS PRO
$20.02
1 Bag of 1000
Bag(s)
1µF Electrolytic 50V dc Through Hole 5 (Dia.) x 11mm 11mm 11mm - 5mm -40°C +105°C - 2mm 1000h
RS Stock No. 723-9703
BrandRS PRO
$0.189
Each (In a Pack of 10)
units
4.7µF Electrolytic 400V dc Through Hole 8 (Dia.) x 14mm 14mm 14mm - 8mm -25°C +105°C - 3.5mm 2000h
RS Stock No. 170-1049
BrandRS PRO
$32.02
1 Bag of 1000
Bag(s)
10µF Electrolytic 50V dc Through Hole 5 (Dia.) x 7mm 7mm 7mm - 5mm -40°C +105°C - 2mm 1000h
RS Stock No. 170-1276
BrandRS PRO
$0.326
Each (In a Bag of 250)
units
470µF Electrolytic 63V dc Through Hole 13 (Dia.) x 26mm 26mm 26mm - 13mm -40°C +105°C - 5mm 2000h
RS Stock No. 170-1273
BrandRS PRO
$0.226
Each (In a Bag of 500)
units
220µF Electrolytic 63V dc Through Hole 10 (Dia.) x 20mm 20mm 20mm - 10mm -40°C +105°C - 5mm 2000h
RS Stock No. 170-1208
BrandRS PRO
$0.689
Each (In a Bag of 100)
units
4700µF Electrolytic 25V dc Through Hole 16 (Dia.) x 31mm 31mm 31mm - 16mm -40°C +105°C - 7.5mm 2000h
RS Stock No. 711-1441
BrandRS PRO
$0.249
Each (In a Pack of 50)
units
100µF Electrolytic 50V dc Through Hole 8 (Dia.) x 11mm 11mm 11mm - 8mm -40°C +105°C - 3.5mm 2000h
RS Stock No. 170-1238
BrandRS PRO
$1.274
Each (In a Bag of 100)
units
4700µF Electrolytic 35V dc Through Hole 18 (Dia.) x 36mm 36mm 36mm - 18mm -40°C +105°C - 7.5mm 2000h
RS Stock No. 170-1044
BrandRS PRO
$47.98
1 Bag of 2000
Bag(s)
330nF Electrolytic 50V dc Through Hole 4 (Dia.) x 7mm 7mm 7mm - 4mm -40°C +105°C - 1.5mm 1000h
RS Stock No. 711-1609
BrandRS PRO
$0.605
Each (In a Pack of 10)
units
220µF Electrolytic 63V dc Through Hole 10 (Dia.) x 20mm 20mm 20mm - 10mm -40°C +105°C - 5mm 2000h
RS Stock No. 170-1248
BrandRS PRO
$71.99
1 Bag of 1000
Bag(s)
100µF Electrolytic 50V dc Through Hole 8 (Dia.) x 11mm 11mm 11mm - 8mm -40°C +105°C - 3.5mm 2000h
RS Stock No. 707-6492
BrandRS PRO
$4.10
Each (In a Pack of 2)
units
33µF Electrolytic 350V dc Through Hole 16 (Dia.) x 36mm 36mm 36mm - 16mm -25°C +105°C - - 1000h
RS Stock No. 711-1198
BrandRS PRO
$1.788
Each (In a Pack of 5)
units
4700µF Electrolytic 25V dc Through Hole 16 (Dia.) x 31mm 31mm 31mm - 16mm -40°C +105°C - 7.5mm 2000h
RS Stock No. 711-1150
BrandRS PRO
$0.29
Each (In a Pack of 10)
units
1000µF Electrolytic 25V dc Through Hole 10 (Dia.) x 20mm 20mm 20mm - 10mm -40°C +105°C - 5mm 2000h
RS Stock No. 173-0267
BrandRS PRO
$0.081
Each (In a Bag of 1000)
units
4.7µF Electrolytic 400V dc Through Hole 8 (Dia.) x 14mm 14mm 14mm - 8mm -25°C +105°C - 3.5mm 2000h
RS Stock No. 711-1374
BrandRS PRO
$3.865
Each (In a Pack of 2)
units
4700µF Electrolytic 35V dc Through Hole 18 (Dia.) x 36mm 36mm 36mm - 18mm -40°C +105°C - 7.5mm 2000h
Related Products
Panasonic FC Series Type A electrolytic capacitors offer ...
Description:
Panasonic FC Series Type A electrolytic capacitors offer a high endurance, low impedance solution. These aluminium capacitors feature endurance between 1000 and 5000 hours. AEC-Q200 qualifiedRadial lead typeLow ESRCompact sizeHigh reliabilityLow impedanceHigh ripple current.
Panasonic FK Series Type V electrolytic capacitors feature ...
Description:
Panasonic FK Series Type V electrolytic capacitors feature endurance of 5000 hours at +105°C. These electrolytic capacitors can withstand high reflow temperatures. AEC-Q200 qualified (some deviations apply)Compact sizeLow ESRHigh reliabilityHigh ripple currentLow impedanceLong lifeSurface mount.
KEMET's ALS70/71 high CV screw terminal capacitors offer ...
Description:
KEMET's ALS70/71 high CV screw terminal capacitors offer tremendous performance and reliability in a wide range of case sizes and voltage ratings, featuring high ripple current and long life performance. Volumetric efficiency ensures the maximum capacitance capability in a smaller ...
KEMET ALS30/31 series screw terminal capacitors cover a ...
Description:
KEMET ALS30/31 series screw terminal capacitors cover a wide range of case sizes and voltage ratings featuring high ripple currents and long-life performance. Typical applications include smoothing, energy storage or pulse operation in telecommunication demanding power supplies, process control, AC ...