Wire Rope Clips & Grips

Filters

Viewing 1 - 9 of 9 products
Results per page
Description Price Specification Wire Rope Diameter Material
RS Stock No. 183-5908
BrandRS PRO
$8.38
Each
units
DIN 741 5mm Stainless Steel
RS Stock No. 197-0130
BrandRS PRO
$24.21
1 Bag of 6
Bag(s)
DIN 1142 5mm Steel
RS Stock No. 197-0174
BrandRS PRO
$61.06
1 Bag of 6
Bag(s)
DIN 1142 13mm Steel
RS Stock No. 183-5891
BrandRS PRO
$7.42
Each
units
DIN 741 3mm Stainless Steel
RS Stock No. 197-0168
BrandRS PRO
$37.47
1 Bag of 6
Bag(s)
DIN 1142 10mm Steel
RS Stock No. 197-0146
BrandRS PRO
$20.28
1 Bag of 6
Bag(s)
DIN 1142 6.5mm Steel
RS Stock No. 197-0152
BrandRS PRO
$20.79
1 Bag of 6
Bag(s)
DIN 1142 8mm Steel
RS Stock No. 247-9076
BrandRS PRO
$4.01
Each
units
DIN 741 6mm Stainless Steel
RS Stock No. 124-4800
BrandRS PRO
$0.72
Each
units
DIN 741 5mm Carbon Steel (U-Bolt), Steel (Bridge)
Related Products
Cutting copper and aluminium cables, single and multiple ...
Description:
Cutting copper and aluminium cables, single and multiple wire Not suitable for steel wire and wire ropes Precision ground, hardened blades One-hand operation using ratchet principle Little handforce required due to very high transmission ratio Two-stage ratchet drive for easy ...
Hard wire ropes, also suitable for cables and ...
Description:
Hard wire ropes, also suitable for cables and round steel Crimping functionPrecise, smoothly-operating screw joint Opening spring in the joint, protected and captiveLocking deviceSpecial blade geometry prevents the wire rope fanning out Chrome vanadium heavy-duty steel, oil-hardened and tempered.
A range of horizontal and vertical toggle-action clamps, ...
Description:
A range of horizontal and vertical toggle-action clamps, ideal for many temporary clamping uses, e.g. printed circuit board/module test jigs or general production or workshop use where fast and effective clamping is required. The design of the clamps enables speed ...
A range of horizontal and vertical toggle-action clamps, ...
Description:
A range of horizontal and vertical toggle-action clamps, ideal for many temporary clamping uses, e.g. printed circuit board/module test jigs or general production or workshop use where fast and effective clamping is required. The design of the clamps enables speed ...