Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 61 - 80 of 549 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 178-7204
BrandRS PRO
$0.113
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 27.3mm 3.2mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-7217
BrandRS PRO
$0.101
Each (In a Bag of 100)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 25.2mm 4.5mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 178-7199
BrandRS PRO
$0.067
Each (In a Bag of 100)
units
- 0.2mm² 0.2 → 0.5 mm², 26 → 22 AWG 0.5mm² 12mm 2.1mm 26AWG Uninsulated 22AWG - - - - -
RS Stock No. 178-7226
BrandRS PRO
$0.106
Each (In a Bag of 100)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 24.6mm 4.5mm 16AWG Insulated 14AWG - Blue - Vinyl -
RS Stock No. 178-7186
BrandRS PRO
$1.226
Each (In a Bag of 50)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 41mm 3.4mm 12AWG Insulated 10AWG - Yellow - - -
RS Stock No. 178-7224
BrandRS PRO
$0.088
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 24.6mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS Stock No. 178-7209
BrandRS PRO
$0.283
Each (In a Bag of 100)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 27.3mm 5.3mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS Stock No. 178-7230
BrandRS PRO
$0.149
Each (In a Bag of 100)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 26.5mm 6.3mm 12AWG Insulated 10AWG - Yellow - Vinyl -
RS Stock No. 178-7232
BrandRS PRO
$0.069
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 21mm 8mm 22AWG Insulated 16AWG - Natural - Nylon -
RS Stock No. 178-8398
BrandRS PRO
$0.138
Each (In a Bag of 100)
units
- - 5.5 mm², 12 → 10 AWG 5.5mm² 17.8mm 9.2mm 12AWG Insulated 10AWG - Natural - Nylon -
RS Stock No. 178-7211
BrandRS PRO
$0.304
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 26mm 4.5mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-7223
BrandRS PRO
$0.179
Each (In a Bag of 100)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 26.5mm 6.3mm 12AWG Insulated 10AWG - Yellow - Vinyl -
RS Stock No. 178-7206
BrandRS PRO
$0.236
Each (In a Bag of 100)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 27.3mm 5.3mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS Stock No. 178-7235
BrandRS PRO
$0.058
Each (In a Bag of 100)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 21mm 8mm 16AWG Insulated 14AWG - Natural - Nylon -
RS Stock No. 178-7201
BrandRS PRO
$0.258
Each (In a Bag of 100)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 21mm 5.4mm 12AWG Uninsulated 10AWG - - - - -
RS Stock No. 178-7205
BrandRS PRO
$0.137
Each (In a Bag of 100)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 27.3mm 3.8mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 178-7200
BrandRS PRO
$0.137
Each (In a Bag of 100)
units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 16mm 3.9mm 16AWG Uninsulated 14AWG - - - - -
RS Stock No. 178-7218
BrandRS PRO
$0.32
Each (In a Bag of 100)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 27.3mm 5.3mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS Stock No. 178-8395
BrandRS PRO
$0.066
Each (In a Bag of 100)
units
- - 1.25 mm², 22 → 16 AWG 1.25mm² 15.2mm 6mm 22AWG Insulated 16AWG - Natural - Nylon -
RS Stock No. 178-7236
BrandRS PRO
$0.147
Each (In a Bag of 50)
units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 25.5mm 10mm 12AWG Insulated 10AWG - Natural - Nylon -
Related Products
TE Connectivity Wing Grip Connectors Wing Grip connectors ...
Description:
TE Connectivity Wing Grip Connectors Wing Grip connectors or wire splices with industry standard colour coding for wire sizes 18 AWG to 6 AWG The twist-on splices have square-wire spring threads which provide a positive grip, moulded 'wings' to enable ...
TE Connectivity PIDG Crimp Bullet Connectors PIDG (Pre-Insulated ...
Description:
TE Connectivity PIDG Crimp Bullet Connectors PIDG (Pre-Insulated Diamond Grip) bullet connectors consisting of receptacle and plug terminals designed for uniform reliability in the most difficult circuit environments These PIDG crimp bullet connectors consist of a precision-formed high conductivity copper ...
TE Connectivity PIDG Spade Tongue Wire Crimp Terminals ...
Description:
TE Connectivity PIDG Spade Tongue Wire Crimp Terminals PIDG (Pre-Insulated Diamond Grip) spade tongue wire crimp terminals designed for uniform reliability in the most difficult circuit environments These PIDG spade tongue terminals consist of a precision-formed high conductivity copper body ...
Phoenix Contact Insulated Crimp Spade Terminals Insulated crimp ...
Description:
Phoenix Contact Insulated Crimp Spade Terminals Insulated crimp spade terminals made from tin plated copper with conically tapered halogen free plastic insulation sleeves These insulated crimp spade terminals feature the 'EASY ENTRY' system. Insulated versions are halogen-free and feature "EASY ...