Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 41 - 60 of 549 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 510-4810
BrandRS PRO
$4.15
1 Bag of 50
Bag(s)
Tap 0.5mm² 20 → 18 AWG 0.75mm² 27mm 20mm 22AWG Insulated 18AWG - Red - PP -
RS Stock No. 510-4804
BrandRS PRO
$46.61
1 Bag of 100
Bag(s)
Butt - 26 → 19 AWG - 19.5mm 8.4mm 26AWG Insulated 19AWG 2 Red, White - - -
RS Stock No. 119-182
BrandRS PRO
$0.416
Each (In a Pack of 25)
units
Butt - 6 mm² 6mm² 19mm 4mm - Uninsulated - - - - - -
RS Stock No. 809-2369
BrandRS PRO
$0.051
Each (In a Pack of 100)
units
Parallel 0.5mm² 22 → 16 AWG 1.5mm² 8mm 3.3mm 22AWG Uninsulated 16AWG - - - - -
RS Stock No. 809-2388
BrandRS PRO
$0.205
Each (In a Pack of 100)
units
Butt 4mm² 12 → 10 AWG 6mm² 20mm 5.4mm 12AWG Uninsulated 10AWG - - - - -
RS Stock No. 841-7683
BrandRS PRO
$0.987
Each (In a Pack of 50)
units
Butt - 50 mm² - 40mm 12.4mm - Uninsulated - - - - - -
RS Stock No. 613-9738
BrandRS PRO
$0.218
Each (In a Pack of 100)
units
Parallel 1.5mm² 16 → 14 AWG 2.5mm² 16.5mm 4.5mm 16AWG Insulated 14AWG - Blue - Vinyl -
RS Stock No. 809-2381
BrandRS PRO
$0.253
Each (In a Pack of 50)
units
Parallel - 8 AWG 8mm² 21mm 7mm - Uninsulated 8AWG - - - - -
RS Stock No. 613-9788
BrandRS PRO
$0.326
Each (In a Pack of 100)
units
Butt 1.5mm² 16 → 14 AWG 2.5mm² 24.2mm 4.5mm 16AWG Insulated 14AWG - Blue - Vinyl -
RS Stock No. 534-913
BrandRS PRO
$0.272
Each (In a Pack of 100)
units
Closed End 2.5mm² 2.5 → 6 mm² 6mm² 24.1mm 10.5mm 10 AWG, 12 AWG Insulated - - Clear - Nylon -
RS Stock No. 809-2379
BrandRS PRO
$0.138
Each (In a Pack of 100)
units
Parallel 4mm² 12 → 10 AWG 6mm² 8.5mm 5.4mm 12AWG Uninsulated 10AWG - - - - -
RS Stock No. 510-8755
BrandRS PRO
$8.52
1 Bag of 50
Bag(s)
Tap 0.75mm² 18 → 14 AWG 2.5mm² 27mm 20mm 18AWG Insulated 14AWG - White - PP -
RS Stock No. 613-9772
BrandRS PRO
$0.226
Each (In a Pack of 100)
units
Parallel 0.5mm² 22 → 16 AWG 1.5mm² 16.5mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS Stock No. 819-9883
BrandRS PRO
$1.304
Each (In a Bag of 10)
units
- - - - - - - - - - - - - -
RS Stock No. 510-4860
BrandRS PRO
$5.34
1 Bag of 50
Bag(s)
Tap 1.5mm² 16 → 14 AWG 2.5mm² 49mm 20mm 16AWG Insulated 14AWG - Blue, Red - Nylon -
RS Stock No. 510-4832
BrandRS PRO
$7.33
1 Bag of 50
Bag(s)
T-Tap 0.5mm² 20 → 18 AWG 0.75mm² 37mm 9.8mm 22AWG Insulated 18AWG - Red - Nylon -
RS Stock No. 613-9766
BrandRS PRO
$0.408
Each (In a Pack of 100)
units
Butt 4mm² 12 → 10 AWG 6mm² 26mm 6.3mm 12AWG Insulated 10AWG - Yellow - Vinyl -
RS Stock No. 510-4911
BrandRS PRO
$23.46
1 Bag of 50
Bag(s)
Tap 0.75mm² 18 → 14 AWG 2.5mm² 34mm 35mm 18AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 841-7692
BrandRS PRO
$1.218
Each (In a Pack of 50)
units
Butt - 70 mm² - 45mm 15mm - Uninsulated - - - - - -
RS Stock No. 178-7214
BrandRS PRO
$0.128
Each (In a Bag of 100)
units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 25.2mm 4mm 22AWG Insulated 16AWG - Red - Nylon -
Related Products
TE Connectivity Wing Grip Connectors Wing Grip connectors ...
Description:
TE Connectivity Wing Grip Connectors Wing Grip connectors or wire splices with industry standard colour coding for wire sizes 18 AWG to 6 AWG The twist-on splices have square-wire spring threads which provide a positive grip, moulded 'wings' to enable ...
TE Connectivity PIDG Crimp Bullet Connectors PIDG (Pre-Insulated ...
Description:
TE Connectivity PIDG Crimp Bullet Connectors PIDG (Pre-Insulated Diamond Grip) bullet connectors consisting of receptacle and plug terminals designed for uniform reliability in the most difficult circuit environments These PIDG crimp bullet connectors consist of a precision-formed high conductivity copper ...
TE Connectivity PIDG Spade Tongue Wire Crimp Terminals ...
Description:
TE Connectivity PIDG Spade Tongue Wire Crimp Terminals PIDG (Pre-Insulated Diamond Grip) spade tongue wire crimp terminals designed for uniform reliability in the most difficult circuit environments These PIDG spade tongue terminals consist of a precision-formed high conductivity copper body ...
Phoenix Contact Insulated Crimp Spade Terminals Insulated crimp ...
Description:
Phoenix Contact Insulated Crimp Spade Terminals Insulated crimp spade terminals made from tin plated copper with conically tapered halogen free plastic insulation sleeves These insulated crimp spade terminals feature the 'EASY ENTRY' system. Insulated versions are halogen-free and feature "EASY ...