Nexperia 5 Demultiplexer SMT 16-Pin SO

  • RS Stock No. 170-7984
  • Mfr. Part No. 74HC4052D,653
  • Manufacturer Nexperia
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The 74HC4052, 74HCT4052 is a dual single-pole quad-throw analog switch (2x SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications. Each switch features four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). A digital enable input (E) and two digital select inputs (S0 and S1) are common to both switches. When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Reduced signal attenuation results in low switching losses
Reduced total harmonic distortion for high quality audio switching
Enable multiplexing of analog sensor signals - reduce number of ADC
Integrated level shifting of control signals interface to lower voltage controllers
Low ON resistance and ON resistance flatness
Low switch leakage
Wide supply voltage
Low input threshold input options
Over-voltage tolerant options
High ESD protection

Specifications
Attribute Value
Mounting Type Surface Mount
Number of Elements per Chip 5
Package Type SO
Pin Count 16
Length 10mm
Dimensions 10 x 4 x 1.45mm
Height 1.45mm
Minimum Operating Temperature -40 °C
Width 4mm
Maximum Operating Temperature +125 °C
2500 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (On a Reel of 2500)
$ 0.21
(exc. GST)
$ 0.23
(inc. GST)
units
Per unit
Per Reel*
2500 - 2500
$0.21
$525.00
5000 - 10000
$0.20
$500.00
12500 - 22500
$0.195
$487.50
25000 +
$0.182
$455.00
*price indicative
Related Products
This array of seven Darlington transistor circuits is ...
Description:
This array of seven Darlington transistor circuits is able to drive high output current (500 mA) Built in input resistor limits the base current Build in clamp diode at the output absorbs surge currents Input and output pins layout is ...
The device is a full bridge motor driver ...
Description:
The device is a full bridge motor driver intended for a wide range of automotive applications The device incorporates a dual monolithic high-side driver and two low-side switches. Both switches are designed using STMicroelectronics’ well known and proven proprietary VIPower®M0-7 ...
STMicroelectronics L293D Push-Pull four channel driver with diodes ...
Description:
STMicroelectronics L293D Push-Pull four channel driver with diodes is assembled in a 16 lead plastic package which has 4 center pins connected together and used for heatsinking This is a monolithic integrated high voltage, high current four channel driver. This ...
The Avago Technologies optically isolated gate drive devices ...
Description:
The Avago Technologies optically isolated gate drive devices are optimised for driving IGBT and Power MOSFET transistors The highly integrated smart gate drive optocouplers provide integrated protection features; Active Miller Clamp, under voltage lockout, fault and UVLO status feedback and ...