Rittal CM Series Sheet Steel Wall Box, IP55, 1000 mm x 800 mm x 400mm

The CM series from Rittal is a 1.5 mm steel enclosure fitted with a 2 mm steel door. It has an open base to accommodate base plates. The CM series combines the benefits of a compact enclosure and the configuration diversity of the TS 8 baying system. Perforated mounting strips in the door enable support strips, cable conduit holders and covers to be attached quickly.

• 1.5 mm steel enclosure and 2 mm steel door
• All-round foamed-in PU seal on door
• Zinc-plated 3 mm steel mounting plate
• Light grey RAL 7035
• Dipcoat primed, powder-coated on the outside, textured paint
• IP55 protection with selection of the appropriate gland plates or trim panel
• IK08 protection
• Open base for individual cable entry

Stock nos. 124-3443, 124-3444, 124-3445, 124-3446, 124-3447, 124-3448, 124-3449 and 124-3450 have 1 door hinged on the right, which can be swapped to the left.
Stock nos. 124-3451, 124-3452, 124-3453, 124-3454, 124-3455 and 124-3456 have 2 doors.

IEC 60 529, NEMA 12.

UL, cUL, CSA, TUV, Lloyds Register of Shipping.

Enclosure, 3-point locking system with double-bit insert and mounting plate.

Safely house your sensitive electronic equipment with this wall box from Rittal. It's made from corrosion-resistant sheet steel, making it suitable for use in harsh conditions. The enclosure is supplied with a door, lock and mounting plate, so you get everything you need for quick assembly. Its open base allows for simple wiring.

• IP55 rating means it's protected against limited amounts of dust and low-pressure water jets
• Door can be mounted on the left or right for flexible assembly
• Foamed-in PU seal to keep contaminants and moisture out

• Communication systems
• IT applications
• Power distribution

This wall box has compact dimensions of 1000 (height) x 800 (width) x 400mm (depth), so it's a good choice for storing smaller electronic devices.