Chauvin Arnoux CA762 IP2X, LED Voltage tester, 690 V ac, 750V dc, Continuity Check, Battery Powered, CAT IV

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762

Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0034 ) and with IP2X accessories ( 914-0037 ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads.

Full integrated autotest
Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC
Single-pole phase test
Phase sequence testing up to 400 Hz
Input impedance >400 kΩ
Continuity testing
Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ
Phase rotation, 2-wire method
Removable test probe and cable
Dimensions 163 x 64 x 40 mm
IP65 protection rating
Weight 210 g

Note

The voltages indicated on the CA762 are nominal voltages - users must ensure the device will be used on networks at standardised voltages.

Supplied with

Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated
by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate

Voltage Level Indicators

A range of voltage testers each available in versions suitable for electronic or electrical applications.

Specifications
Attribute Value
Maximum Voltage 690 V ac, 750V dc
Continuity Check Yes
Safety Category CAT IV 600V
Display Type LED
IP Rating IP65
Battery Type AAA Battery, LR3 Battery
Power Source Battery
Dimensions 163 x 64 x 40mm
Weight 210g
Height 40mm
Length 163mm
Maximum Operating Temperature +45°C
Minimum Operating Temperature -15°C
Model Number p CA762 IP2X
Safety Category Voltage 600V
Safety Category Level CAT IV
Width 64mm
30 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each
$ 145.41
(exc. GST)
$ 159.95
(inc. GST)
units
Per unit
1 +
$145.41
Related Products
MS-918-PG Voltage Multi-Tester MS-918-PG is a voltage absence ...
Description:
MS-918-PG Voltage Multi-Tester MS-918-PG is a voltage absence tester in accordance with EN 61243-3 (2010) In response to the requirements of the new standard NF C 18-510 and with the European standard EN 50110-1.MS-918-PG ensures both VCU function and extra ...
The Catu voltage multi-tester measures voltage ranging between ...
Description:
The Catu voltage multi-tester measures voltage ranging between 12V and 690VAC/DC It comes with a blister pack, 2xAAA batteries and a user manual. Checks polarity Searches for phase and neutral Checks the continuity (200ohm) with a pushbutton Frequency ranges between50Hz ...
The Fluke 2-pole voltage and continuity tester measure ...
Description:
The Fluke 2-pole voltage and continuity tester measure voltage ranging between 12V and 690VAC/DC This tester offers the best combination of safety, ease of use and fast answers available anywhere. It comes with probe storage accessory, push-on probe tips, batteries ...
The Fluke 2-pole voltage and continuity tester measure ...
Description:
The Fluke 2-pole voltage and continuity tester measure voltage ranging between 12V and 690VAC/DC This tester offers the best combination of safety, ease of use and fast answers available anywhere. It comes with probe storage accessory, push-on probe tips, batteries ...