Chauvin Arnoux CA742 IP2X, LED Voltage tester, 690 V ac, 750V dc, Continuity Check, Battery Powered, CAT IV

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA742

Chauvin Arnoux CA742 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0021 ) and with IP2X accessories ( 914-0025 ). The CA742 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA742 checks the electrical circuits, the power supply, the display and the condition of the measurement leads.

Features and Benefits

Full integrated autotest
Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC
Single-pole phase test
Phase sequence testing up to 400 Hz
Input impedance >300 kΩ
Continuity testing
Removable test probe and cable
Dimensions 163 x 64 x 40 mm
IP65 protection rating
Weight 210 g

Note

The voltages indicated on the CA742 are nominal voltages - users must ensure the device will be used on networks at standardised voltages.

Standards

EN 61243-3 Ed.2009, EN 61243-3 Ed.2010, DIN VDE 0682-401 Ed.2011

Supplied with

Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated
by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate

Voltage Level Indicators

A range of voltage testers each available in versions suitable for electronic or electrical applications.

Specifications
Attribute Value
Maximum Voltage 690 V ac, 750V dc
Continuity Check Yes
Safety Category CAT IV 600V
Display Type LED
IP Rating IP65
Battery Type AAA Battery, LR3 Battery
Power Source Battery
Dimensions 163 x 64 x 40mm
Weight 210g
Height 40mm
Length 163mm
Maximum Operating Temperature +45°C
Width 64mm
Safety Category Voltage 600V
Safety Category Level CAT IV
Model Number p CA742 IP2X
Minimum Operating Temperature -15°C
11 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each
$ 147.76
(exc. GST)
$ 162.54
(inc. GST)
units
Per unit
1 +
$147.76
Related Products
Amprobe ECB50A The transmitter module generates a coded ...
Description:
Amprobe ECB50A The transmitter module generates a coded signal that is injected into a powered AC line, and the receiver wand uses this signal to reject noise and correctly identify the correct circuit breaker or fuse wire Three testers in ...
Fluke T5-600 & T5-1000 Multi-function Electrical Testers Fluke ...
Description:
Fluke T5-600 & T5-1000 Multi-function Electrical Testers Fluke T5 electrical testers are compact tools for checking voltage, continuity and current With a T5 model, the operator has only to select volts, ohms or current and the tester does the rest. ...
The Fluke phase rotation indicator has a voltage ...
Description:
The Fluke phase rotation indicator has a voltage range of 40V to 700V and frequency range of 15Hz to 400Hz It shows a clear indication of three-phase systems and the phase rotation direction to determine correct connections. This allows rapid ...
The Fluke phase rotation indicator has voltage up ...
Description:
The Fluke phase rotation indicator has voltage up to 400V and frequency range of 2Hz to 400Hz It can be used to determine motor rotation on synchronous and asynchronous 3 phase motors. The contact-less detection is ideal for use on ...