John Drummond DRUMTL20, LED Voltage tester, 500V ac/dc, Mains Powered, CAT III 1000V

Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): PH
Product Details

Drummond Test Lamp MTL20

Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems
Additional two button test allows the unit to draw a high current to differentiate between potentially hazardous phantom voltages and hazardous persistent voltages
Finger shields and insulated probe tips with only 4mm of exposed metal
Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
No batteries required

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.

Supplied with

Right angled probe tip, two straight tips and instructions

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.

Mains Voltage Indicators - Contact

Specifications
Attribute Value
Maximum Voltage 500V ac/dc
Safety Category CAT III 1000 V, CAT IV 600V
Display Type LED
IP Rating IP67
Power Source Mains
Dimensions 213 x 112 x 72mm
Weight 350g
Height 72mm
Length 213mm
Maximum Operating Temperature +55°C
Width 112mm
Safety Category Voltage 600 V, 1000 V
Safety Category Level CAT III, CAT IV
Model Number p DRUMTL20
Minimum Operating Temperature -10°C
22 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each
$ 169.18
(exc. GST)
$ 186.10
(inc. GST)
units
Per unit
1 +
$169.18
Related Products
The Megger digital clamp meter is an ideal ...
Description:
The Megger digital clamp meter is an ideal clamp meter for use during the installation, maintenance and checking of electrical systems and equipment The large clamp jaw enables cables to be measured up to 27mm diameter. It covers the majority ...
Sanwa DCM400 Series Clamp Meter Able to measure ...
Description:
Sanwa DCM400 Series Clamp Meter Able to measure current frequency4000 count display Voltage frequency measurement range up to 10MHz To IEC1010 CATIII 300V, CATII 600V DCM 400 Frequency measurement by clamp or test leads DCM 400 AD One push calibration ...
Volt-Stick AC Indicator RS PRO offers an ingenious ...
Description:
Volt-Stick AC Indicator RS PRO offers an ingenious pocket device voltage indicator for determining the presence of 50Hz AC voltages These voltage indicators are battery powered pen style units with nylon tips that glow red when a voltage is detected.There ...
The Fluke VoltALERT non-contact voltage detector is a ...
Description:
The Fluke VoltALERT non-contact voltage detector is a 1AC device with a voltage rating of 90VAC to 1000VAC Simply touch the tip of the device to a terminal strip, supply wire or outlet and the whole nib glows red and ...