Fluke Networks IntelliTone LAN Test Equipment of Cable Continuity

  • RS Stock No. 831-9009
  • Mfr. Part No. MT-8200-61-TNR
  • Manufacturer Fluke Networks
Technical data sheets
Legislation and Compliance
Non Compliant
COO (Country of Origin): MY
Product Details

IntelliTone Pro 200 Lan Toner

The IntelliTone Pro 200 LAN Toner is a digital and analog tone generator that verifies and troubleshoots virtually any copper cabling in datacom and telecom networks.

The IntelliTone Pro 200 LAN Toner generates IntelliTone digital signals that minimize the effect of signal bleed for locating high-grade data cabling (Cat 5e/6/6a) on active networks, and generates 500 to 1200 Hz analog signals with four distinct SmartTone songs for isolating individual wire pairs and locating voice, audio, and video cabling (Cat 3 and below) on inactive networks
Provides robust toning into active network equipment while eliminating cable misidentification due to bleed
Banana jacks allow you to use only the leads you need and facilitates easy replacement
Supports all VDV cable types (RJ45, RJ11, coax, and bare wire)
Test cable continuity, eliminating need for separate diagnostic tool
Precisely isolate wire pairs with built-in SmartTone analog toning
Tone active networks safely and effectively with IntelliTone digital mode
Identify resistance and if digital tone or analog tone function is operational
Identify and diagnose Ethernet link connectivity with NIC/hub indication
Cable termination indicator identifies if cable is connected or not
Knob provides simple, task oriented operation

Supplied with

Coax F Connector Cables, RJ11 patch cable, RJ45 patch cable, Test leads with alligator clips, Lanyard, Quick Start Guide, 9V Battery.

Specifications
Attribute Value
Test Type Cable Continuity
Tone Yes
Power Source Battery
Battery Type PP3
Battery Life 20 h
Dimensions 141 x 75 x 32mm
Width 75mm
Maximum Operating Temperature +40°C
Length 141mm
Height 32mm
Minimum Operating Temperature 0°C
Temporarily out of stock - back order for despatch 11/02/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 295.44
(exc. GST)
$ 324.98
(inc. GST)
units
Per unit
1 +
$295.44
Related Products
The pocket-sized GDLS 350, GDLS 355 and GTP ...
Description:
The pocket-sized GDLS 350, GDLS 355 and GTP 240 Light Sources represent the latest design in stabilised light sources for accurate loss measurement Standard NIST calibrated, Dual wavelength units or single wavelength unit (1490nm) are available for Multimode & Singlemode ...
Fiber Quick Map™ Kit with Simpli Fiber Pro ...
Description:
Fiber Quick Map™ Kit with Simpli Fiber Pro featuring all the items in the FOS-100-M plus Simpli Fiber Pro-optical power meter and SC adapter Fiber Quick Map™ fills the gap between a VFL and an OTDR.The model has the simplicity ...
FI-525 Fiber Inspector Micro and Cleaning kit Wet ...
Description:
FI-525 Fiber Inspector Micro and Cleaning kit Wet and dry cleaning supplies to remove contamination discovered during fiber inspection with the FI-500.Dirty fibre optic endfaces are the major cause of problems in single-mode and multimode fibre optic systems. The FI-500 ...
The Verification Kits are for contractors and network ...
Description:
The Verification Kits are for contractors and network technicians who install and maintain multimode premises networks Verify optical loss and power levels at 850 nm and 1300 nm, inspect fiber end-faces, locate cable faults, connector problems and polarity issues. Kit ...