FTDI Chip FT600Q-B-T, USB Bridge IC, USB 2.0, USB 3.0 2-Port at 480 (USB 2.0) Mbit/s, 5 (USB 3.0) Gbit/s, 3.3 V dc

  • RS Stock No. 146-6835
  • Mfr. Part No. FT600Q-B-T
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Enabling faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.

16bit/32bit wide parallel FIFO interface.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.

Specifications
Attribute Value
Number of Transceivers 2
Data Rate 5 (USB 3.0) Gbit/s, 480 (USB 2.0) Mbit/s
Protocols Supported USB 2.0, USB 3.0
Power Supply Type Single
ESD Protection Yes
Typical Single Supply Voltage 3.3 V dc
Mounting Type Surface Mount
Package Type QFN
Pin Count 56
Dimensions 7.1 x 7.1 x 0.69mm
Height 0.69mm
Length 7.1mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Width 7.1mm
1040 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Tray of 260)
$ 12.60
(exc. GST)
$ 13.86
(inc. GST)
units
Per unit
Per Tray*
260 +
$12.60
$3,276.00
*price indicative
Related Products
The CSTCR series of MHz band ceramic resonators ...
Description:
The CSTCR series of MHz band ceramic resonators from Murata are part of the CERALOCK® range. CERALOCK® ceramic resonators are constructed from high stability piezoelectric ceramics. Featuring built in load capacitance, these SMD ceramic resonators eliminate the need for external ...
The FTDI Chip TTL-232x USB to Serial UART ...
Description:
The FTDI Chip TTL-232x USB to Serial UART (TTL level) converter cables provide a simple and fast way to convert microcontroller UART serial I/O to USB. The TTL-232R contains a small circuit board which includes the FT232x chip. Encapsulated in ...
The VNC2 is the second of FTDI’s Vinculum ...
Description:
The VNC2 is the second of FTDI’s Vinculum family of Embedded dual USB host controller devices. The VNC2 device provides USB Host interfacing capability for a variety of different USB device classes including support for BOMS (bulk only mass storage), ...
The FTDI Chip TTL-232x USB to Serial UART ...
Description:
The FTDI Chip TTL-232x USB to Serial UART (TTL level) converter cables provide a simple and fast way to convert microcontroller UART serial I/O to USB. The TTL-232R contains a small circuit board which includes the FT232x chip. Encapsulated in ...