FTDI Chip, SSOP USB to Serial UART 3MBd, 28-Pin FT232RL

  • RS Stock No. 406-580
  • Mfr. Part No. FT232RL
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

FT232R - USB to Serial UART with Clock Generator, FTDI Chip

The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic.

A unique number, the FTDIChip-ID, is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle. It can then be used to protect customer application software from being copied. Royalty-free drivers for the most common operating systems are available from FTDI website. http://www.ftdichip.com

The FT232R is available in compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.

Features & Benefits

• Single chip USB to asynchronous serial data transfer interface.
• Entire USB protocol handled on the chip. No USB-specific firmware programming required.
• Fully integrated 1024-bit EEPROM storing device descriptors and CBUS I/O configuration.
• Fully integrated USB termination resistors.
• Fully integrated clock generation with no external crystal required plus optional clock output
• Data transfer rates from 300 Baud to 3 MBaud (RS422, RS485, RS232) at TTL levels.
• 128 B receive buffer and 256 B transmit buffer utilising buffer smoothing technology to allow for high data throughput

Applications

USB Industrial Control
USB bar code readers
USB Digital camera interface
USB wireless modems
PDA to USB Transfers
USB Card readers
USB FLASH card readers and writers
USB Audio and low bandwidth video data transfer

Specifications
Attribute Value
Number of Channels per Chip 1
Transmit FIFO 128B
Receive FIFO 256B
Maximum Data Rate 3MBd
Mounting Type Surface Mount
Package Type SSOP
Pin Count 28
Dimensions 10.2 x 5.3 x 1.75mm
Length 10.2mm
Width 5.3mm
Height 1.75mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
20 : Next working day (AU stock)
7515 : 7 working days (Global stock)
Price (ex. GST) Each
$ 7.80
(exc. GST)
$ 8.58
(inc. GST)
units
Per unit
1 - 9
$7.80
10 - 49
$7.43
50 - 99
$7.04
100 - 249
$6.09
250 +
$5.73
Packaging Options:
Related Products
USB 20 Hi-Speed Mini-Module, FTDI Chip The FT2232H ...
Description:
USB 20 Hi-Speed Mini-Module, FTDI Chip The FT2232H Mini-Module is a USB-to-Serial/FIFO unit that utilizes the FT2232H USB Hi-Speed 2-port bridge chip The FT4232H Mini-Module is a USB-to-Serial/MPSSE unit that utilizes the FT4232H USB Hi-Speed 4-port bridge chip The IC ...
FT220X, FT221X, Full Speed USB 20 to 4-Bit ...
Description:
FT220X, FT221X, Full Speed USB 20 to 4-Bit SPI / FT1248 Bridge The FT220X and FT221X Full Speed USB 2.0 ICs offer a compact bridge to 4-Bit SPI / FT1248 interfaces. The devices can acknowledge USB bus data, capable of ...
Cypress’s EZ-USB FX3 is a Super Speed peripheral ...
Description:
Cypress’s EZ-USB FX3 is a Super Speed peripheral controller, providing integrated and flexible features FX3 has a fully configurable, parallel, general programmable interface called GPIF II, which can connect to any processor, ASIC, or FPGA. GPIF II is an enhanced ...
Type-C™ attach and cable orientation detection Power role ...
Description:
Type-C™ attach and cable orientation detection Power role support: source/sink/DRPConfigurable start-up profiles Integrated power switch for VCONN supply:programmable current limit up to 600 m Aovercurrent, overvoltage, and thermal protectionunder-voltage lockout I²C interface and interrupt Integrated VBUS voltage ...