FTDI Chip, SSOP UART Interface RS232, RS422, RS485, SIE, UART 3MBd, 5 V, 16-Pin FT230XS-R

  • RS Stock No. 757-0010P
  • Mfr. Part No. FT230XS-R
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip

The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.

- Fully integrated MTP memory, clock generation, AVCC filtering, Power-On Reset (POR) and LDO regulators.
- Configurable CBUS I/O Pin Options.
- Asynchronous and Synchronous Bit Bang Modes.
- Operates at between +3.3 V and +5.25 V. A nominal operational mode current of 8 mA and a nominal USB suspend mode current of 125 μA.

Specifications
Attribute Value
Number of Channels per Chip 1
Standard Supported RS232, RS422, RS485, SIE, UART
Transmit FIFO 512B
Receive FIFO 512B
Maximum Data Rate 3MBd
Transmitter and Receiver FIFO Counter Yes
Mounting Type Surface Mount
Package Type SSOP
Pin Count 16
Typical Operating Supply Voltage 5 V
Dimensions 0.197 x 0.157 x 0.059in
Length 5mm
Width 0.157in
Height 1.5mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
10506 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each (Supplied on a Reel) Quantities below 150 on continuous strip
$ 3.23
(exc. GST)
$ 3.55
(inc. GST)
units
Per unit
10 - 38
$3.23
40 - 98
$3.165
100 - 198
$3.095
200 +
$3.03
Packaging Options:
Related Products
The TTL-234X-5V-WE and TTL-234X-3V3-WE cables are both un-terminated, ...
Description:
The TTL-234X-5V-WE and TTL-234X-3V3-WE cables are both un-terminated, they are bare and tinned wires The difference between the two cables is that the TTL-234X-5V-WE operates at +5V levels (signals and power supply) and the TTL-234X-3V3-WE operates at +3.3V levels (signals ...
The TTL-234X-5V and TTL-234X-3V3 cables are both terminated ...
Description:
The TTL-234X-5V and TTL-234X-3V3 cables are both terminated by a 6 way, 01”, Single-In-Line (SIL) connector. The difference between the two cables is that the TTL-234X-5V operates at +5V levels (signals and power supply) and the TTL-234X-3V3 operates at +3.3V ...
The TTL-234X-5V-AJ and TTL-234X-3V3-AJ cables are both terminated ...
Description:
The TTL-234X-5V-AJ and TTL-234X-3V3-AJ cables are both terminated by a standard 35mm Audio Jack (AJ) connector. The difference between the two cables is that the TTL-234X-5V-AJ operates at +5V levels and the TTL-234X-3V3-AJ operates at +3.3V levels. On these cables ...
FT220X, FT221X, Full Speed USB 20 to 4-Bit ...
Description:
FT220X, FT221X, Full Speed USB 20 to 4-Bit SPI / FT1248 Bridge The FT220X and FT221X Full Speed USB 2.0 ICs offer a compact bridge to 4-Bit SPI / FT1248 interfaces. The devices can acknowledge USB bus data, capable of ...