Facom Stainless Steel SLS Height Safe Belt Ring, 4kg Capacity

  • RS Stock No. 910-3341
  • Mfr. Part No. CT-ACC
  • Manufacturer Facom
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Facom SLS Height Safe Tool Rings

Working Safely At Height

The SLS, Safety Lock System, range of tools from Facom were created for use at height. They preserve the comfort, quality and level of performance you expect.

These Facom tool accessory rings were designed for the SLS tool belt. Available with and without carabiners you can choose the option that best helps you carry and use your tools. They feature a large D shape ring to help you move tools to an optimal position.

Features and Benefits

• Accessory for belt of the Facom SLS range
• CT-ACC2M is supplied with 2 60 mm stainless steel snap hooks with locking screw
• The 2 snap hooks are integral with the "D" shaped metal ring
• Strap width: 50 mm
• Loop height: 50 mm
• Internal width of the "D" ring: 50 mm
• Internal height of the "D" ring: 40 mm
• Acceptable rated load: 4 kg
• Weight: 100 g

Product Application

SLS Height Safe Tools

To help prevent accidents that affect health and productivity Facom brings you the SLS range of tools. They can withstand twice the weight of the tool and are real world tested. The metal design can withstand extreme shocks, temperatures and other harsh working conditions.


An individual traction test is performed on each tool upon ring assembly. An inspection certificate is issued and a unique serial number engraved on the tool. Facom can hence follow up its production to guarantee maximum safety. The unique serial number also ensures that the tool is identified and followed throughout its lifetime.

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:


existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

Attribute Value
Type Metal Ring
Maximum Supported Weight 4kg
Material Stainless Steel
Height Safe Yes
32 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 18.01
(exc. GST)
$ 19.81
(inc. GST)
Per unit
1 +
Related Products
The Power Tool Trap™ securely wraps around the ...
The Power Tool Trap™ securely wraps around the battery portion of drills, impact drivers and other cordless power tools. D-Ring connection point attaches to a lanyard to prevent drops. 1000D nylon with water resistant backingTwo hook and loop straps secure ...
Tape Measure Trap securely wraps around most standard ...
Tape Measure Trap securely wraps around most standard tape measures. D-Ring connection point attaches to a lanyard to prevent drops. 1200D and 600D polyester main materialHook and loop straps secure tape measure inside trap for safe and easy tetheringZinc-plated cast ...
Web Tool Tails™ provide retrofit attachment points to ...
Web Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 2lbs (0.90kg) using Squids® Tape Traps. Ultra strength nylon webbingFully enclosed plated D-ring for secure attachmentHigh tensile strength nylon threadWeb catch with double stitch ...
Shock absorbing tool lanyard with carabiner on both ...
Shock absorbing tool lanyard with carabiner on both ends: Designed and tested to prevent falling objects and reduce the force your body sees if a drop occurs by absorbing the energy transmitted through the tool lanyard. Shock absorbing properties reduce ...