Facom Metal (Buckle) SLS Height Safe Tool Belt

  • RS Stock No. 910-3335
  • Mfr. Part No. CT70-100
  • Manufacturer Facom
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Facom SLS Height Safe Tool Belts

Working Safely At Height

The SLS, Safety Lock System, range of tools from Facom were created for use at height. They preserve the comfort, quality and level of performance you expect.

These Facom tool belts were designed for the SLS range of tools. With different sizes available, you can choose the option that best helps you carry and use your tools. They feature dual point metal loop and slots for CT-ACC accessories.

Features and Benefits

• Belt to fasten tools of the Facom SLS range
• Dual point metal loop prevents accidental opening and ensures optimum safety
• Supplied with comfort foam pad with hook and loop for optimum adjustment
• Belt compatible with the accessories of the Facom SLS range
• 8 x 50 mm slots for CT-ACC2M or CT-ACC accessories
• Height of the accessory storage strap: 45 mm
• Waist size: 70 to 100 cm
• Weight: 390 g

Product Application

SLS Height Safe Tools

To help prevent accidents that affect health and productivity Facom brings you the SLS range of tools. They can withstand twice the weight of the tool and are real world tested. The metal design can withstand extreme shocks, temperatures and other harsh working conditions.


An individual traction test is performed on each tool upon ring assembly. An inspection certificate is issued and a unique serial number engraved on the tool. Facom can hence follow up its production to guarantee maximum safety. The unique serial number also ensures that the tool is identified and followed throughout its lifetime.

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:


existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

Attribute Value
Type Belt
Belt Included Yes
Material Metal (Buckle)
Padded Belt Yes
Height Safe Yes
6 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 155.49
(exc. GST)
$ 171.04
(inc. GST)
Per unit
1 +
Related Products
Technics voltage tester case, made with tough reinforced ...
Technics voltage tester case, made with tough reinforced fabric. Offers an inner padded pocket and protection for delicate test equipment. • Made from reinforced material to minimise wear and tear• Elastic holders for precision and small tools• Padded impact-resistant inner ...
A range of Tool belt accessories that can ...
A range of Tool belt accessories that can be mixed together to create a personalised combination to suit your individual needs. Reinforced, padded, wear resistant polyesterCarries up to 18V cordless drillAdditional pockets for drills and accessoriesQuick release strap secures tool ...
Protective, weatherproof pouch designed for use with smartphones ...
Protective, weatherproof pouch designed for use with smartphones such as the iPhone. Transparent cover allows the user to operate the handset without openig the pouch. Can be fitted to the Plano tool belt PL52201 774-2843. SplashproofPenholderUniversal metal clipsReinforced fabric designZipped. ...
Professional C.K Magma builder's tool belt set with ...
Professional C.K Magma builder's tool belt set with 9 individual pockets. Belt set containing a padded belt (MA2723), drill holster (MA2720), mobile phone holder (MA2722) and builder's tool pouch (MA2716A).Tough heavy duty construction designed to fit 97 - 132 cm ...