KLBUE, Clamping Yoke for use with Terminal Blocks

  • RS Stock No. 268-1651
  • Mfr. Part No. KLBUE 3-8 -1600480000
  • Manufacturer Weidmuller
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): RO
Product Details

Shielded Terminal Cable

Terminal cable clamps enabling easy termination and connection of cable shielding to terminal blocks. The cable clamps accept shielded cable diameters between 3 and 13.5mm and are manually mounted on a 10 x 3mm busbar attached to a busbar support (not currently supplied by RS) which is mounted on the DIN rail.

Note

10 x 3mm busbar is not included

Specifications
Attribute Value
Accessory Type Clamping Yoke
For Use With Terminal Block
Series KLBUE
120 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Pack of 5)
$ 12.25
(exc. GST)
$ 13.47
(inc. GST)
units
Per unit
Per Pack*
5 +
$12.25
$61.25
*price indicative
Related Products
Zinc-plated and passivated steel inserts All contacts on ...
Description:
Zinc-plated and passivated steel inserts All contacts on any one pole are commoned Nylon body material Mounts direct to flat surface (including metal base) or to miniature DIN rail (stock no. 467-349)The tab/tab type has three 6.3 mm ( in.) ...
COMBICON MKDS PCB terminal blocks are small and ...
Description:
COMBICON MKDS PCB terminal blocks are small and compact in design • Robust moving cage principle accepts wires up to 1.5 mm² (1.0 mm² stranded)• Reliable strain relief due to separate solder pin and terminal sleeve• Rated at 200 V/12 ...
High quality PCB mount screw terminals available in ...
Description:
High quality PCB mount screw terminals available in vertical, 55° entry or double level mouldings Standard, low profile and high current versions are all available on either 2 way or 3 way housings, side stackable up to 30 way. All ...
Cable ends comprising a tinned copper tube with ...
Description:
Cable ends comprising a tinned copper tube with a moulded isolating collar at the endThe copper tube envelops the strands of the flexible conductor and facilitates introduction into terminals.These ends are available for conductors with cross-sections from 0.5 → 2.5 ...