RS PRO Fascia Thermocouple Connector for Use with Type J Thermocouple, Miniature Size, IEC Standard

Our RS Pro range of miniature panel-mounted thermocouple sockets are thoroughly tested to ensure reliability without compromise. Constructed from polarised, glass filled polyester to ensure and accurate and insulated connection. Connections to the miniature thermocouples are achieved from a sturdy nylon fascia clip. Miniature thermocouple connectors have a flat pin termination type, and a polarised via unequally sized pins.

Washers included for swift mounting
Colour coding in accordance with IEC specification
Accepts up to 0.5² wire
K, J, T, E, N, R/S, B & Copper thermocouple socket variants available

These miniature thermocouple connectors are an accurate and convenient way of interconnecting your temperature sensing components. Using thermocouple connectors allows a chain to be formed from the measuring tip of your temperature sensor to the host computer or meter. It is important that all the components in the chain are made from the same thermocouple material to prevent any alteration or distortion of the original signal. To achieve this, thermocouple connectors have contacts made from the same material as the thermocouple they are being used to connect or a compensating material. The connector housing has the thermocouple type clearly printed on it and is also colour-coded for easy identification. The thermocouple wires are simply screwed down into place using two captive screw clamps.

• Contacts made from true thermocouple alloys or a compensating material for accurate signal transmission
• Colour-coded for quick and easy identification
• Moulded fascia for flush fitting on front of panel
• Accepts polarized flat pin contacts for an accurate connection
• Made from rugged glass-filled thermoplastic
• Able to withstand temperatures of up to 120°C
• Simple captive screw clamp connection for quick assembly
• Polarity and thermocouple type clearly marked on the socket housing
• Supplied with clip for quick and secure mounting to the panel

These miniature thermocouple connectors are used in any application where thermocouples are installed, extended or replaced. Their robust construction makes these thermocouple connectors ideal for use in demanding temperature measurement applications.

Aluminium faceplates are available for use with these panel mount thermocouple connectors
Stock number 397-1674 (2 way)
Stock number 397-1703 (4 way)
Stock number 236-4132 (6 way)
Stock number 397-1719 (12 way)
Stock number 762-1156 (16 way)
Stock number 762-1165 (20 way)
Stock number 762-1168 (24 way)

Miniature connectors have flat pin and they are polarised by means of unequally sized pins.

Small Pack Size:455-9691
Large Pack Size:262-3115