CK-37, Double Sided Extender Board Conversion Board CEM-3 26 x 16 x 1.6mm

Micro-USB Micro-AB connector is converted to 2.54mm pitch. The connector is already mounted.

A pin header is included for convenient connection to the main board.
There is approximately 5mm from the rear end of the connector to the take-out land, so mounting on a panel or case is easy.
Because there are mounting holes at two corners, the conversion board can be firmly fixed.
Mounting holes are also 2.54mm pitch.
With 3 bags, the board can be easily folded from the V-cut part by hand.