Reliance Water Controls Stainless Steel Stopcock, 1/2in

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): IT
Product Details

Potable Water Shock Arrestor

Potable water shock arrestors are designed to prevent water hammer. Water hammer is caused by shock waves running through the water system which create noise or in severe cases pipe movement within a system, reverberations are a series of shock waves in quick succession. The pressure wave in such circumstances can be up to three times greater than the standing pressure. Water hammer occurs when the flow rate is suddenly changed.
The solution is to fit a shock arrestor directly before the affected fitting. The shock arrestor is a mini expansion vessel, which works by absorbing the shock wave from the fitting so it does not travel through the system and cause a noise, the closer the shock arrestor is installed to the fitting the better

Maximum temperature: 99゚C
Minimum temperature: -10゚C
Pre-set Pressure: 5 bar
Maximum working pressure: 15 bar
Stainless Steel Flange
Dimensions: 105 (H) x 65 diameter

Approvals

WRAS Approved

Expansion Vessels

Specifications
Attribute Value
Connection 1 1/2 in BSP Male
Body Material Stainless Steel
For Use With Cold Water, Hot Water
Operating Pressure 5bar
Connection Gender 1 Male
Pipe Size 1 1/2in
Operating Temperature Range -10 → +99 °C
7 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 80.32
(exc. GST)
$ 88.35
(inc. GST)
units
Per unit
1 - 9
$80.32
10 - 24
$77.25
25 - 49
$75.31
50 +
$73.40
Related Products
RS screwed end ball valves for the control ...
Description:
RS screwed end ball valves for the control of flow Available in a variety of sizes. Investment casting Blow-out proof stem Locking deviceISO 5211 Mounting padTA-Luft approved (option)Length conform to DIN 3202/4-M3-2013SM3 (option)Thread type: ASME B1.20.1 (NPT) DIN2999 and BS21 ...
RS Brand Stainless Steel Screwed End Ball Valves ...
Description:
RS Brand Stainless Steel Screwed End Ball Valves for the control of flow Full port 1/4" to 4" (DN8 to DN100)W.P: 1000 WOG (PN63)W.T: -20°C to 200°CInvestment casting Blow-out proof stem Locking deviceISO 5211 Mounting pad Thread type: ASME B1.20.1 ...
High quality brass valves Manufactured in accordance with ...
Description:
High quality brass valves Manufactured in accordance with BS1010: part 2 Fitted with traditional crutch head Compression ends accord with BS864: part 2 Working pressure maximum 10 bar at 65°CFemale parallel BSP threaded versions to BS2779.
This Sferaco washing machine stop cock allows you ...
Description:
This Sferaco washing machine stop cock allows you to have controllable flow to your device directly The stop cock features both male inlet and outlet connections. A construction of brass offers a strength and reliability, with a chrome plated finish. ...