Geckodrive G250X Stepper Motor Controller 3.5 A, 15 → 50V dc, 42.55 x 33.66 x 12.7mm

  • RS Stock No. 896-8553
  • Mfr. Part No. G250X
  • Manufacturer Geckodrive
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

G250X - Step Motor Drive

The G250 is a high-quality step motor drive, build on a circuit board with 2x15 2.54mm header for the connection.


Stepper Motor Drive
Input frequency till 250kHz
Temperature range 0 to 70 °C
Also available is a “Screw and Heatsink Kit”, stock no. 896-8557

Specifications
Attribute Value
For Motor Type Stepper Motor
Current Rating 3.5 A
Voltage Rating 50 V dc
Board Supply Voltage 15 → 50V dc
Motor Supply Voltage 50V dc
Overall Length 42.55mm
Overall Width 33.66mm
Overall Depth 12.7mm
16 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 112.55
(exc. GST)
$ 123.81
(inc. GST)
units
Per unit
1 +
$112.55
Related Products
The PCU D10 display and control panel connects ...
Description:
The PCU D10 display and control panel connects by two wires to the APM110E as a remote display repeater and programming module Supply voltage 10 Vdc from APM110EAnalogue output 4-20mA16 LEDs for indicate the unitIP54 protection PanelmountingCut out 68x68 mm ...
ST5-S and ST10-S step drives offer the following ...
Description:
ST5-S and ST10-S step drives offer the following features: Pulse and directionCW/CCW pulseA/B quadrature Analogue velocity (oscillator) mode Host commands (SCL compatible)Si Net hub (HUB 444, stock no. 455-867) compatibleST Configurator software for setup (software included).
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features: Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadrature Host control mode Idle current reduction Anti-resonance Torque ripple smoothing ...
Drives motors up to 40V at 35AAdjustable drive ...
Description:
Drives motors up to 40V at 35AAdjustable drive current settings from 0.5 to 3.5AOutput overload protection Synchronisation output for multi-axis systems Full and half step drive modesTTL & CMOS compatible control interface Output disable input5 & 12Vdc auxiliary outputs for ...