Applied Motion Systems ST10-SI Stepper Motor Controller 10 A, 24 → 80V dc, 5 x 3 x 1.75in

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

ST5-Si and ST10-Si Programmable Stepper Drive

ST5-Si and ST10-Si programmable step drives offer the following features:

Software setup using ST Configurator (software included)
Microstepping 200 to 58000 steps/rev.
Pulse and direction: pulse/direction, CW/CCW, A/B quadrature
Host control mode
Idle current reduction
Anti-resonance
Torque ripple smoothing
Microstep emulation
8 digital inputs
4 digital outputs
May be fitted with option boards to provide an encoder feedback option (ST-ENC, stock no. 455-857) and RS-485 option (ST-RS485, stock no. 455-835)

Specifications
Attribute Value
For Motor Type Bipolar
Current Rating 10 A
Board Supply Voltage 24 → 80V dc
Overall Length 5in
Overall Width 3in
Overall Depth 1.75in
2 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 996.45
(exc. GST)
$ 1,096.09
(inc. GST)
units
Per unit
1 +
$996.45
Related Products
The PCU D10 display and control panel connects ...
Description:
The PCU D10 display and control panel connects by two wires to the APM110E as a remote display repeater and programming module Supply voltage 10 Vdc from APM110EAnalogue output 4-20mA16 LEDs for indicate the unitIP54 protection PanelmountingCut out 68x68 mm ...
The STEVAL-IHM023V3 Evaluation Board is an AC-DC inverter ...
Description:
The STEVAL-IHM023V3 Evaluation Board is an AC-DC inverter that generates a three-phase waveform for driving two- or three-phase motors such as induction motors or Permanent-Magnet Synchronous Motor (PMSM) motors up to 1000W Minimum input voltage: 125VDC or 90VACMaximum input voltage: ...
Drives motors up to 40V at 35AAdjustable drive ...
Description:
Drives motors up to 40V at 35AAdjustable drive current settings from 0.5 to 3.5AOutput overload protection Synchronisation output for multi-axis systems Full and half step drive modesTTL & CMOS compatible control interface Output disable input5 & 12Vdc auxiliary outputs for ...
Drives motors up to 85V and 6A/phase On ...
Description:
Drives motors up to 85V and 6A/phase On board output drive current setting (25 to 6.0A)High efficiency chopped constant current power stage provides increased performance and reduced current consumption Single supply rail simplifies power supply requirements Short-circuit and open circuit ...