- RS Stock No.:
- 146-5267
- Mfr. Part No.:
- ASNU 25
- Brand:
- Stieber
On back order for despatch 22/07/2024, delivery within 10 working days from despatch date.
Added
Price (ex. GST) Each
$585.57
(exc. GST)
$644.13
(inc. GST)
Units | Per unit |
1 - 4 | $585.57 |
5 + | $569.12 |
- RS Stock No.:
- 146-5267
- Mfr. Part No.:
- ASNU 25
- Brand:
- Stieber
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details
Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. A typical arrangement is to install this type alongside a bearing within the same location tolerances. The inner race is keyed to the shaft. The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission. If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.
Specifications
Attribute | Value |
---|---|
Inside Diameter | 25mm |
Outside Diameter | 62mm |
Torque | 125Nm |
Race Width | 24mm |
Series | 63 |
Over-running Speed | 1700 (Inner) rpm, 2600 (Outer) rpm |
Keyway | Inner and Outer Race |
Drag Torque | 5.6Ncm |
Related links
- INA HF1012-L564 Sprag Clutch Bearing 10mm I.D. 12mm Race Width
- INA HFL1226-L564 Sprag Clutch Bearing 12mm I.D. 26mm Race Width
- INA HFL1826-L564 Sprag Clutch Bearing 18mm I.D. 26mm Race Width
- INA HFZ061008-L564 Sprag Clutch Bearing 9.53mm I.D. 12.7mm Race Width
- INA HFL1626-L564 Sprag Clutch Bearing 16mm I.D. 26mm Race Width
- INA HF2016-L564 Sprag Clutch Bearing 20mm I.D. 16mm Race Width
- INA HF2520-L564 Sprag Clutch Bearing 25mm I.D. 20mm Race Width
- INA HFL1426-L564 Sprag Clutch Bearing 14mm I.D. 26mm Race Width