Asco Solenoid Valve SC G262C090 VM-24VCA, 2 port , NC, 24 V ac, 1/4in

  • RS Stock No. 656-3507
  • Mfr. Part No. SC G262C090 VM-24VCA
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

262 series 2 / 2 direct operated solenoid valves

2 / 2 N/C direct-operated solenoid valves for vacuum service, 1/4" outlet.
Special manufacturing procedures used to avoid molecular contamination.
Do not require a minimum operating pressure.
Suitable for low and medium vacuum service.
Rough vacuum up to 1.33.10-3 mbar.
Pluggable connectors.

Body Brass
Weight 0.35 kg
Dimensions (mm) 39 x 75 x 92
Rated power Inrush: 34 Va
  Holding: 15.6 Va
Allowable pressure differential (bar) 1 bar (absolute)
Response time 5 → 25 ms

Standards

ISO 4400 - IEC 335

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V ac
Number of Ports 2
Operation Direct
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Air, Inert Gas, Oil, Water
Type 2/2
Orifice Diameter 7.1mm
Body Material Brass
Maximum Working Pressure 2.5 bar
Operating Temperature Range -20 → +75 °C
Minimum Operating Temperature -20°C
Maximum Operating Temperature +75°C
Maximum Opening Time 25ms
Series 262
Connection Gender Female
Flow Factor Kv 0.82m³/h
Maximum Closing Time 25ms
Thread Standard or Connection Type G
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 318.87
(exc. GST)
$ 350.76
(inc. GST)
units
Per unit
1 +
$318.87
Related Products
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° incrementsDuty cycle intermittent operation 40% 30 min8W nominal coil powerPower consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero ...
Parker 2-way solenoid valves are used in a ...
Description:
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. CompressorsWater dispensing & purificationCooling systemsMedical ...
Manifold type mounting valveMedium is only in contact ...
Description:
Manifold type mounting valveMedium is only in contact with the valve internals and bodyHigh quality seal material FPM (Viton) standardCoil can be changed easily with valve in placeCoil can be locked in 4 x 90° positions or move freely between, ...
Range of solenoid valves 3 // 2 NF ...
Description:
Range of solenoid valves 3 // 2 NF DL output, with exhaust when off, for neutral liquids up to +100 °C.Mounting on simple or multi-track bases.Able to change the solenoid without removing the valve.High quality FPM (Viton) sealing material as ...