Asco Solenoid Valve SC G202A052 V -24VCC, 2 port , NC, 24 V dc, 1/4in

  • RS Stock No. 656-3311
  • Mfr. Part No. SC G202A052 V -24VCC
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

202 series direct operated 2 / 2 solenoid valves

POSIFLOW direct operated proportional solenoid valves.
2 / 2 N/C solenoid valves, 1/4" output.
Variable flow, proportional to the control signal.
Do not require a minimum operating pressure.
Can be mounted in any position.
2 mounting holes in body.
Plug connector (Ø 6 → 10 mm cable).
Allowable fluids: air, inert gas, water, oil.

Standards

ISO 4400 / EN 175301-803, form A - IEC 335

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 2
Operation Direct
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Liquid
Type 2/2
Orifice Diameter 2.4mm
Body Material Brass
Maximum Working Pressure 16 bar
Operating Temperature Range -10 → +90 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +90°C
Thread Standard or Connection Type G
Series 202
Connection Gender Female
Flow Factor Kv 0.12m³/h
1 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 308.42
(exc. GST)
$ 339.26
(inc. GST)
units
Per unit
1 +
$308.42
Related Products
Solenoid valves with pivoted armatures Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments Duty cycle intermittent operation 40% 30 min8W nominal coil power Power consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A ...
Two-way, direct operated, EN161 approved solenoid valves for ...
Description:
Two-way, direct operated, EN161 approved solenoid valves for use on gas pilot and gas burner control, zero bar minimum operating pressure, normally closed, threaded port connection Pressure not required for operation Compact & lightweightISO 4400 DIN connection Class A, group ...
Three-way solenoid valves with zero bar minimum operating ...
Description:
Three-way solenoid valves with zero bar minimum operating pressure, normally closed with threaded port connection Brass body Pressure not required for operation Compact & lightweightDIN plug connection Ranging from -10°C to +100°CCan be mounted in any position.
Two-way, normally closed, condensate drain valve assembly with ...
Description:
Two-way, normally closed, condensate drain valve assembly with electronic timer Condensate Drain Valves are ideally suited to be used with compressors, are compact and lightweight, and offer adjustable on and off periods. Timer designed for automatic control of condensate draining ...