Asco Solenoid Valve SC B223A125 -230V 50HZ, 2 port , NC, 230 V ac, 1/4in

  • RS Stock No. 656-3282
  • Mfr. Part No. SC B223A125 -230V 50HZ
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

223 series 2 / 2 N/C solenoid valves

2 / 2 N/C power-assisted, floating piston solenoid valves for high pressure fluids, 1/4" or 3/8" output (depending on model).
Heavy-duty two-way shut-off solenoid valves for control of pressurised fluids compatible with the seal materials used.
Valves require a minimum ΔP.
Can be mounted in any position.
Pluggable connectors.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Pilot
Connection 1/4 in NPT Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Air, Inert Gas, Oil, Water
Type 2/2
Orifice Diameter 8mm
Body Material Brass
Maximum Working Pressure 100 bar
Operating Temperature Range -20 → +90 °C
Minimum Operating Temperature -20°C
Maximum Operating Temperature +90°C
Series 223
Maximum Closing Time 60ms
Connection Gender Female
Maximum Opening Time 60ms
Flow Factor Kv 1.3m³/h
Thread Standard or Connection Type NPT
2 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 418.70
(exc. GST)
$ 460.57
(inc. GST)
units
Per unit
1 +
$418.70
Related Products
The SMC VX3000 series is a direct acting, ...
Description:
The SMC VX3000 series is a direct acting, 3 port solenoid valve Suited to various applications such as air, oil, water and steam. Valves are easily replaced without changing existing piping. DIN electrical connection Class B & Class H coil ...
Solenoid valves with pivoted armatures Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments Duty cycle intermittent operation 40% 30 min8W nominal coil power Power consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A ...
Two-way, pilot operated solenoid valves for hot water/steam ...
Description:
Two-way, pilot operated solenoid valves for hot water/steam applications, normally closed with threaded port connection Brass body Compact design to minimize heat radiation lossDIN plug connection Ranging from -20 to +184°CCan be mounted in any position.
Parker 2-way solenoid valves are used in a ...
Description:
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. Compressors Water dispensing & purification ...