Burkert Solenoid Valve 143306, 2 port , NC, 24 V dc, 1/4in

  • RS Stock No. 370-0034
  • Mfr. Part No. 143306
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details
//media.rs-online.com/t_line/L439060-04.gif
//media.rs-online.com/t_line/L439240-02.gif

Burkert Solenoid Valve

The Burkert 6211 series 1/4inG female servo assisted solenoid valve has a supply voltage of 24VDC. This 2-port NC position valve with a servo diaphragm is a push-over system and has high-quality NBR seal. The valve is normally closed by spring force. Energized, the solenoid opens the pilot valve first. Then the medium pressure opens the main valve due to the pressure drop above the diaphragm. The special design and geometry of the inner parts of the valve result in a soft closing function and cause almost no water hammer. The maximum opening and closing time of the valve is 20ms and 130ms. It is suitable with gas, air, water and oils, other liquids that do not contain oils or greases, hot water up to 70°C, alkaline and bleaching detergents.
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the operation of the valve when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Features and Benefits

Maximum working pressure is 10bar
Energy-saving AC07 coil, max. DN 20
Flow factor(Kv) is 1.9m³/h
Orifice diameter is 10mm
Operating temperature is between 0°C and 55°C
Power consumption is 4W

Certifications

IP65 rated

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 2
Operation Pilot
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Neutral Liquid
Type 2/2
Orifice Diameter 10mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range 0 → +55 °C
Minimum Operating Temperature 0°C
Maximum Operating Temperature +55°C
Maximum Opening Time 20ms
Servo Assist Yes
Connection Gender Female
Series 6211
Flow Factor Kv 1.9m³/h
Maximum Closing Time 130ms
Thread Standard or Connection Type G
1 : Next working day (AU stock)
11 : 5 working days (Global stock)
Price (ex. GST) Each
Was $122.13
$ 100.90
(exc. GST)
$ 110.99
(inc. GST)
units
Per unit
1 - 5
$100.90
6 - 11
$98.32
12 +
$96.62
Related Products
6014 General Purpose Solenoid Valve Brass bodied, normally ...
Description:
6014 General Purpose Solenoid Valve Brass bodied, normally closed solenoid valves Coil changed easily with valve in place Two female ports and a 1/8 in. male vent port Coil can be locked in four by 90° positions or move free ...
Series 255 Two Way Normally Closed Solenoid Valves ...
Description:
Series 255 Two Way Normally Closed Solenoid Valves For use with water, steam, air, gasses, hot oils and hydrocarbons, alkaline washing agents Heat-resistant slip-over epoxy encapsulated coil Brass body and PTFE Seal Three-pin DIN connector rated to IP65 can be ...
Stainless steel bodied, 3-way, Type 330 Solenoid valves ...
Description:
Stainless steel bodied, 3-way, Type 330 Solenoid valves with pivoted armatures which provide high pressure operation with aggressive gases and fluids BSP parallel ports compatible with RS stainless compression fittingsIP65 rated 3-pin DIN connector can be positioned through 360° in ...
PP and PVDF, 2 and 3 way, Type ...
Description:
PP and PVDF, 2 and 3 way, Type 124 Solenoid valves with pivoted armatures Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments Duty cycle intermittent operation 40% 30 min8W nominal coil power ...