Burkert Solenoid Valve 143492, 2 port , NO, 230 V ac, 1/4in

  • RS Stock No. 337-5565
  • Mfr. Part No. 143492
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Type 0211 - Direct-acting 2/2 way plunger valve

The 0211 Burkert Solenoid Valve is a 2-way solenoid valve which is direct acting and normally has a closed (Circuit function A) or normally open (Circuit function B).

Features and Benefits

• Vibration-resistant block-screwed coil design.
• Compact design, up to DN 6.
• Housing made of brass and stainless steel with threaded connection.
• Arrow on valve body indicates flow direction.

Where is a Burkert Solenoid Valve used?

This Solenoid Valve is usually used for sealing ports.

How can I mount a Solenoid Valve?

Mounting is accomplished by means of four M4 x 8 mm tapped holes located on the valve underside.


For this product to be considered UL-listed and CSA approved for General Purpose and FM approved for Hazardous Locations Division 2, it must be in conjunction with the type 2509 cable plug connector (Electrically Operated Valves Parts, YSYI2). The connector and gasket must be assembled to the valve with the screw provided after the connection of the wire leads. This valve and connector assembly is delivered together and is to be used as
one unit.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NO
Suitable Applications Compressed Air, Gas, Hydraulic Oil, Neutral Liquid
Type 2/2
Orifice Diameter 2.5mm
Body Material Brass
Maximum Working Pressure 8 bar
Operating Temperature Range -10 → +55 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Thread Standard or Connection Type G
Connection Gender Female
Flow Factor Kv 0.16m³/h
Series 0211
5 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 111.38
(exc. GST)
$ 122.52
(inc. GST)
Per unit
1 - 4
5 - 9
10 +
Related Products
Stainless steel bodied, 3-way, Type 330 Solenoid valves ...
Stainless steel bodied, 3-way, Type 330 Solenoid valves with pivoted armatures which provide high pressure operation with aggressive gases and fluids BSP parallel ports compatible with RS stainless compression fittingsIP65 rated 3-pin DIN connector can be positioned through 360° in ...
PP and PVDF, 2 and 3 way, Type ...
PP and PVDF, 2 and 3 way, Type 124 Solenoid valves with pivoted armatures Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments Duty cycle intermittent operation 40% 30 min8W nominal coil power ...
Series 255 Two Way Normally Closed Solenoid Valves ...
Series 255 Two Way Normally Closed Solenoid Valves For use with water, steam, air, gasses, hot oils and hydrocarbons, alkaline washing agents Heat-resistant slip-over epoxy encapsulated coil Brass body and PTFE Seal Three-pin DIN connector rated to IP65 can be ...
3/2 way Compact, Type 6014Ex The direct-acting 3/2-way, ...
3/2 way Compact, Type 6014Ex The direct-acting 3/2-way, normally closed type 6014Ex solenoid valve is suitable for use with neutral and aggressive gases and fluids, for example: compressed air, town and natural gas, water, and hydraulic oil, in filling, dosing, ...