Burkert Solenoid Valve 134590, 2 port , NC, 24 V dc, 1/2in

  • RS Stock No. 313-2087
  • Mfr. Part No. 134590
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Series 5404 Two-way High Pressure Normally Closed, Servo Assisted Solenoid Valve

Brass body with polyamide coil, PTFE seal material and stainless steel 1.4310 spring
High reliability
Unaffected by pressure surges
Easy coil change
Coil can be locked in four 90° positions, or move between as required
For use with compressed air pressure systems and gas turbines using compressed air; natural gas and water
Operating tempeature range -10 to +90°C
Protection rating IP65 with cable plug DIN43650C

//media.rs-online.com/t_line/L313208-01.gif
//media.rs-online.com/t_line/L439060-04.gif
//media.rs-online.com/t_line/L439240-02.gif

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 2
Operation Pilot
Connection 1/2 in G Female
Connection Size 1/2in
Default Valve Position NC
Suitable Applications Compressed Air, Hydraulic Oil, Neutral Media, Water
Type 2/2
Orifice Diameter 12mm
Body Material Brass
Maximum Working Pressure 50 bar
Operating Temperature Range -10 → +55 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Connection Gender Female
Servo Assist Yes
Maximum Opening Time 400ms
Series 5404
Flow Factor Kv 2m³/h
Maximum Closing Time 1500ms
Thread Standard or Connection Type G
5 : Next working day (AU stock)
125 : 5 working days (Global stock)
Price (ex. GST) Each
$ 328.98
(exc. GST)
$ 361.88
(inc. GST)
units
Per unit
1 - 5
$328.98
6 +
$315.82
Related Products
Two-way, pilot operated solenoid valves for hot water/steam ...
Description:
Two-way, pilot operated solenoid valves for hot water/steam applications, normally closed with threaded port connection. Brass bodyCompact design to minimize heat radiation lossDIN plug connection Ranging from -20 to +184°CCan be mounted in any position.
Membrane valve for partially aggressive gaseous and liquid ...
Description:
Membrane valve for partially aggressive gaseous and liquid fluidsSuitable for vacuumsFixed flow directionValve operates without minimum pressure differentialElectromagnetic operationForced lift.
Burkert proportional solenoid valves provide continuously adjustable and ...
Description:
Burkert proportional solenoid valves provide continuously adjustable and smooth control over the flow of fluid passing through them. Unlike conventional solenoid and process valves which offer only On or off control, Burkert 2875series process valves use PWM (pulse width modulation) ...
Solenoid valves with and without EEx permitStainless steel ...
Description:
Solenoid valves with and without EEx permitStainless steel designFor partially aggressive liquids and gasesSuitable for vacuumsCompact actuation magnet with integrated sleeveValve operates without minimum pressure differential (Δp)ΔMagnet can be replaced without tools (Click-on®).