Burkert Solenoid Valve 125658, 2 port , NC, 24 V ac, 1/2in

  • RS Stock No. 306-9759
  • Mfr. Part No. 125658
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Two-way General Purpose Solenoid Valves, Type 6213

The valve can be mounted in any position, but mounting with coil uppermost is preferred.

Normally closed solenoid valves suitable for use with oil, fat without additives, water and neutral fluids
BSP parallel ports suitable for use with compression fittings
Epoxy encapsulated coils
Three-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments
0-10 bar pressure range
Nominal coil power 8W
Maximum operating temperature 55°C
Power consumption 21VA (Inrush, AC); 12 VA/8 W (Constant, AC); 8W (DC)
Protection to IP65

//media.rs-online.com/t_line/L439060-04.gif
//media.rs-online.com/t_line/L439240-02.gif

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V ac
Number of Ports 2
Operation Pilot
Connection 1/2 in G Female
Connection Size 1/2in
Default Valve Position NC
Suitable Applications Liquid
Type 2/2
Orifice Diameter 13mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +55 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Connection Gender Female
Thread Standard or Connection Type G
Servo Assist Yes
Series 6213
Flow Factor Kv 3.6m³/h
Maximum Closing Time 4s
Maximum Opening Time 4s
6 : Next working day (AU stock)
69 : 5 working days (Global stock)
Price (ex. GST) Each
$ 222.33
(exc. GST)
$ 244.56
(inc. GST)
units
Per unit
1 - 4
$222.33
5 - 9
$213.42
10 +
$211.19
Related Products
Solenoid valves with pivoted armatures which provide high ...
Description:
Solenoid valves with pivoted armatures which provide high pressure operation with aggressive gases and fluids. BSP parallel ports compatible with RS stainless compression fittingsIP65 rated 3-pin DIN connector can be positioned through 360° in 90° incrementsZero head pressure capabilityLockable manual ...
Insensitive to contaminated fluids except for sharp, solid ...
Description:
Insensitive to contaminated fluids except for sharp, solid and long fibresBody and lid material PVC; internal parts PVDF and PVC; EPDM sealsDouble seal to valve interiorNon-metallic valve internalsLockable manual overridePressure range: 0.5 to 6 barPower consumption 20VA (Inrush ac); 11VA/5W ...
Manifold type mounting valveMedium is only in contact ...
Description:
Manifold type mounting valveMedium is only in contact with the valve internals and bodyHigh quality seal material FPM (Viton) standardCoil can be changed easily with valve in placeCoil can be locked in 4 x 90° positions or move freely between, ...
Range of solenoid valves 3 // 2 NF ...
Description:
Range of solenoid valves 3 // 2 NF DL output, with exhaust when off, for neutral liquids up to +100 °C.Mounting on simple or multi-track bases.Able to change the solenoid without removing the valve.High quality FPM (Viton) sealing material as ...