Burkert Solenoid Valve 053188, 2 port , NC, 230 V ac, 1/4in

  • RS Stock No. 440-931
  • Mfr. Part No. 053188
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Series 255 Two Way Normally Closed Solenoid Valves

For use with water, steam, air, gasses, hot oils and hydrocarbons, alkaline washing agents
Heat-resistant slip-over epoxy encapsulated coil
Brass body and PTFE Seal
Three-pin DIN connector rated to IP65 can be positioned 360° in 90° increments
Fluid temperature range to 180°C (130°C with fitted cable plug)
Ambient temperature +55°C maximum

//media.rs-online.com/t_line/L439060-04.gif
//media.rs-online.com/t_line/L439240-02.gif
//media.rs-online.com/t_line/L478735-22.gif
//media.rs-online.com/t_line/LD439155-02.gif
//media.rs-online.com/t_line/LE439155-02.gif
//media.rs-online.com/t_line/LI439155-02.gif

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Direct
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Alcohol, Fuel, Hydraulic Oil, Organic Solvent, Steam, Waste Gas, Water
Type 2/2
Orifice Diameter 4mm
Body Material Brass
Maximum Working Pressure 12 bar
Operating Temperature Range -40 → +55 °C
Minimum Operating Temperature -40°C
Maximum Operating Temperature +55°C
Maximum Closing Time 30ms
Connection Gender Female
Maximum Opening Time 20ms
Thread Standard or Connection Type G
Flow Factor Kv 0.5m³/h
Series 0255
5 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 295.17
(exc. GST)
$ 324.69
(inc. GST)
units
Per unit
1 - 5
$295.17
6 +
$286.76
Related Products
Stainless steel bodied, 3-way, Type 330 Solenoid valves ...
Description:
Stainless steel bodied, 3-way, Type 330 Solenoid valves with pivoted armatures which provide high pressure operation with aggressive gases and fluids BSP parallel ports compatible with RS stainless compression fittingsIP65 rated 3-pin DIN connector can be positioned through 360° in ...
PP and PVDF, 2 and 3 way, Type ...
Description:
PP and PVDF, 2 and 3 way, Type 124 Solenoid valves with pivoted armatures Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments Duty cycle intermittent operation 40% 30 min8W nominal coil power ...
Two-way, N/C, Gas Pilot/Burner Control Valves Two-way, direct ...
Description:
Two-way, N/C, Gas Pilot/Burner Control Valves Two-way, direct operated, EN161 approved solenoid valves for use on gas pilot and gas burner control, zero bar minimum operating pressure, normally closed, threaded port connection Pressure not required for operation Compact & lightweightISO ...
Condensate Drain Valves Two-way, normally closed, condensate drain ...
Description:
Condensate Drain Valves Two-way, normally closed, condensate drain valve assembly with electronic timer Condensate Drain Valves are ideally suited to be used with compressors, are compact and lightweight, and offer adjustable on and off periods. Timer designed for automatic control ...