Hydralectric Solenoid Valve 72004, 2 port , NC, 240 V ac, 1/2in

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Two-way Solenoid Valves

Two-way solenoid diaphragm operated, normally closed valves are ideal for controlling water pressure 0.2 to 10 bar. The valve is continuously rated when the fluid temperature is below 25°C, the ambient temperature is below 60°C and the flow rate is above 5 L/min. A duty cycle of 40% is required for fluid temperatures up to 90°C

Features and Benefits

Application Information

• Coil can be located in any one of eight positions
• Maximum flow rate: 17 L/min
• 0.2 bar to 10 bar pressure range
• Power consumption: 4 W
• Nylon 6 body with 1/2 inch BSP ports (can be base mounted)
• 1/4 inch spade coil terminals
• In the 12Vdc/24 V/ac version, the solenoid coil is wound so either voltage can be passed through it

Typically used in hand washers, refrigeration equipment and automatic tap systems.

Eight position coil location

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Attribute Value
Supply Voltage 240 V ac
Number of Ports 2
Operation Direct
Connection 1/2 in BSP
Connection Size 1/2in
Default Valve Position NC
Suitable Applications Water
Type 2/2
Body Material Nylon
Maximum Working Pressure 10 bar
Operating Temperature Range Maximum of +60 °C
Maximum Operating Temperature +60°C
Thread Standard or Connection Type BSP
Connection Gender Male
15 : Next working day (AU stock)
167 : 5 working days (Global stock)
Price (ex. GST) Each
$ 39.72
(exc. GST)
$ 43.69
(inc. GST)
Per unit
1 - 5
6 - 24
25 +
Related Products
The SMC VX3000 series is a direct acting, ...
The SMC VX3000 series is a direct acting, 3 port solenoid valve. Suited to various applications such as air, oil, water and steam. Valves are easily replaced without changing existing piping. DIN electrical connectionClass B & Class H coil availableCompact ...
Two-way, pilot operated solenoid valves for hot water/steam ...
Two-way, pilot operated solenoid valves for hot water/steam applications, normally closed with threaded port connection. Brass bodyCompact design to minimize heat radiation lossDIN plug connection Ranging from -20 to +184°CCan be mounted in any position.
Two-way, direct operated, EN161 approved solenoid valves for ...
Two-way, direct operated, EN161 approved solenoid valves for use on gas pilot and gas burner control, zero bar minimum operating pressure, normally closed, threaded port connection. Pressure not required for operationCompact & lightweightISO 4400 DIN connectionClass A, group 2 service ...
Insensitive to contaminated fluids except for sharp, solid ...
Insensitive to contaminated fluids except for sharp, solid and long fibresBody and lid material PVC; internal parts PVDF and PVC; EPDM sealsDouble seal to valve interiorNon-metallic valve internalsLockable manual overridePressure range: 0.5 to 6 barPower consumption 20VA (Inrush ac); 11VA/5W ...